Looking for help revising a .DXF or .STL file. (Engagement ring box project)

Post here if you have a FreeCAD-related job to offer to the FreeCAD community. This can include programming or modeling.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
Deltonic
Posts: 1
Joined: Fri Feb 23, 2018 1:51 pm

Looking for help revising a .DXF or .STL file. (Engagement ring box project)

Post by Deltonic »

I'm looking to propose to my girlfriend using a 3D print of a ring pop. The engagement ring will be inside the ring pop; revealed by removing/opening the top. I've found various models online, but none have quite fit my needs. I do have 2 models currently, one .dxf and one .stl. Both of which are solid top pieces. I need to hollow out the top gem/candy portion and make the top part removable to reveal the ring. I have no experience with modeling, but I feel like it'd be quite simple for most of you. Let me know if you're interested in helping. Thanks!
ArnoldB
Posts: 5
Joined: Sat Feb 17, 2018 9:28 am

Re: Looking for help revising a .DXF or .STL file. (Engagement ring box project)

Post by ArnoldB »

Hi,

Please check PM

Thanks
Arnold
Post Reply