Would anyone be interested in modifying Raspberry Pi 3 case stl or gcode for my specs?

Post here if you have a FreeCAD-related job to offer to the FreeCAD community. This can include programming or modeling.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
bob512
Posts: 1
Joined: Sun Sep 23, 2018 2:10 pm

Would anyone be interested in modifying Raspberry Pi 3 case stl or gcode for my specs?

Post by bob512 »

I have set of Raspberry Pi 3 case stl and gcode.

Would anyone be interested in modifying this Raspberry Pi 3 case for my specs and coaching me of 'how-to', etc.

I will pay for this if rate is reasonable and affordable.

I am independent software developer and trying to learn FreeCAD, it is definitely challenging.

Please see attached zip file with two stl front and back shell.

Simple things.
1. Extend height on one stl to accommodate internal space
2. Cut open square for touch screen placement
3. Extend length on two items to accomodate longer internal battery

Thank you.
Bob
Attachments
files.zip
(408.84 KiB) Downloaded 98 times
anna
Posts: 19
Joined: Thu Jan 04, 2018 1:17 pm

Re: Would anyone be interested in modifying Raspberry Pi 3 case stl or gcode for my specs?

Post by anna »

bob512 wrote: Sun Sep 23, 2018 2:26 pm I have set of Raspberry Pi 3 case stl and gcode.

Would anyone be interested in modifying this Raspberry Pi 3 case for my specs and coaching me of 'how-to', etc.

I will pay for this if rate is reasonable and affordable.

I am independent software developer and trying to learn FreeCAD, it is definitely challenging.

Please see attached zip file with two stl front and back shell.

Simple things.
1. Extend height on one stl to accommodate internal space
2. Cut open square for touch screen placement
3. Extend length on two items to accomodate longer internal battery

Thank you.
Bob
Hi Bob,
I can surely assist you.
Sent you PM with further details.
BR,
Anna
Post Reply