Parts design

Post here if you have a FreeCAD-related job to offer to the FreeCAD community. This can include programming or modeling.
Posts: 1
Joined: Fri Sep 28, 2018 6:26 pm

Parts design

Postby SSC » Fri Sep 28, 2018 6:34 pm

I am looking for help with a simple design,
a case the size of a "can of lighter fluid" needs top, bottom and parts need to "snap" together, example: top snapping onto the body whereas the top would overlap the body of the case, have a groove around the inside and the body would have a raised ridge to snap into the groove.

same for the bottom, but the bottom would also have a hinge to swing away but stay attatched.. Drawings can be provided and approximate measurements.

Posts: 11
Joined: Thu Apr 20, 2017 11:11 am

Re: Parts design

Postby victor.cis » Sat Sep 29, 2018 5:41 am


I can assist you. PM sent with my contact info