Solid model correction - small job

Post here if you have a FreeCAD-related job to offer to the FreeCAD community. This can include programming or modeling.
shema
Posts: 3
Joined: Wed Mar 20, 2019 2:32 pm

Solid model correction - small job

Postby shema » Mon Oct 05, 2020 10:02 am

Hello all,

I am looking for someone to perform the correction on the geometry of existing solid model (Parasolid format).

Thanks for responding!
chrisb
Posts: 30875
Joined: Tue Mar 17, 2015 9:14 am

Re: Solid model correction - small job

Postby chrisb » Mon Oct 05, 2020 12:42 pm

Can you get the model in Step format?
You need at least FreeCAD 0.19.23300 to edit my current sketches.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
shema
Posts: 3
Joined: Wed Mar 20, 2019 2:32 pm

Re: Solid model correction - small job

Postby shema » Mon Oct 05, 2020 7:11 pm

Yes, I can provide model in STEP format. However, the final output at delivery should be in Parasolid.
chrisb
Posts: 30875
Joined: Tue Mar 17, 2015 9:14 am

Re: Solid model correction - small job

Postby chrisb » Mon Oct 05, 2020 8:45 pm

FreeCAD cannot write that on its own, so you need someone to convert the final file.
You need at least FreeCAD 0.19.23300 to edit my current sketches.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Serchu
Posts: 91
Joined: Tue Feb 10, 2015 12:33 pm
Location: Tigre (Buenos Aires) - Argentina
Contact:

Re: Solid model correction - small job

Postby Serchu » Tue Oct 27, 2020 12:52 am

Had been solved the issue?