FreeCAD Parts Design and Assemblies Tutor $40/hr (negotiable)

Post here if you have a FreeCAD-related job to offer to the FreeCAD community. This can include programming or modeling.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
User avatar
skeer562
Posts: 3
Joined: Wed Feb 24, 2021 2:16 am
Location: Colorado

FreeCAD Parts Design and Assemblies Tutor $40/hr (negotiable)

Post by skeer562 »

I'm trying to model a cargo van with camper conversion modifications, but I'm so new to FreeCAD, that it's very hard. I'm looking for someone who's going to be able to call me, and I can share my screen.
Near term:
Learn assembly level constraints (I'm guessing this is workbench: A2Plus, Assembly 3, or Assembly 4?), mating, positioning, and etc. I have an imported step file that needs to be properly constrained in place. I want to constrain the fan (step file) shown by the driver's rear wheel to the top middle of the roof and specify how many inches it should be from the back of the van.
Fix the van floor thickness and wheel wells. Talk about order of operations for "sculpting" to make the chassis look more like a real Ford Transit.
Chamfer the vehicle's boxy edges

Long term:
Potential for more work. Help with issues that come up, questions, and potentially walking through new concepts and teachings.

Pay:
Negotiable, depending on experience. Starts at $40 per hour for minimum experience.

Hours:
Evenings (MST, timezone) and weekends as needed, flexible

Experience:
Minimum of 1000 hours on FreeCAD
Knowledgeable about part creation, parts design workbench, assemblies, and assembly constraints.
A2PLUS, Assembly 3, or Assembly 4 workbench (if needed for my task)
Linux is an added plus

Reply back to this message with your:
Estimated number of hours designing on FreeCAD
Experience related to what I'm wanting to learn
Why you think you'd be a good fit

Current model:
Image
Idea of what the project will look like:
Image
Image
User avatar
Cekuhnen
Posts: 443
Joined: Sat Jul 10, 2021 11:37 pm

Re: FreeCAD Parts Design and Assemblies Tutor $40/hr (negotiable)

Post by Cekuhnen »

Out of curiosity why do you want to use assemblies for this?
You hardly have mechanical parts like an engine or such.
MacOS Big Sur / Win 10

Designer | Faculty
Wayne State University
Interior - Industrial Design
User avatar
Aleks
Posts: 309
Joined: Sun Mar 08, 2020 5:27 pm
Location: Bonn, Germany
Contact:

Re: FreeCAD Parts Design and Assemblies Tutor $40/hr (negotiable)

Post by Aleks »

Have you already found someone? If not, then send me a message: aleksander.sadowski@alsado.de
FreeCAD als Maschinenbauer in die Konstruktion und Fertigung integrieren. Schulung buchen: www.alsado.de/freecad-schulungen
Post Reply