Part-Designer

Post here if you have a FreeCAD-related job to offer to the FreeCAD community. This can include programming or modeling.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Tole1970
Posts: 65
Joined: Thu Apr 08, 2021 6:56 am

Part-Designer

Post by Tole1970 »

Hello, I'm new with Freecad and my english is very bad. I'm searching for someone who can make 1 Part for me. 3D incl. 2D-PDF Drawing. In the attachement is a picture of the part. I can send the dimensions later.
Attachments
IMG_8526.jpg
IMG_8526.jpg (76.56 KiB) Viewed 3612 times
Rechtschreibfehler sind pure Absicht und dienen nur der Belustigung des Lesers. ;)
chrisb
Veteran
Posts: 53786
Joined: Tue Mar 17, 2015 9:14 am

Re: Part-Designer

Post by chrisb »

Hi and welcome to the forum!

Would you be willing to donate to the project if we create a community solution. And if so, how much would it be worth?
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Tole1970
Posts: 65
Joined: Thu Apr 08, 2021 6:56 am

Re: Part-Designer

Post by Tole1970 »

Hello, i think it is only 1 small part. And i can pay approximatly 30€ for that. I need the 3D Step file and 2D pdf-Files for a CNC-Shop that they can produce it for me.
Rechtschreibfehler sind pure Absicht und dienen nur der Belustigung des Lesers. ;)
Tole1970
Posts: 65
Joined: Thu Apr 08, 2021 6:56 am

Re: Part-Designer

Post by Tole1970 »

Now a few dimensions:
The inner hole -> 20 mm
The outer thread -> 1,37"x24 BSA 60°
The Keyway -> 6 mm wide
The fixing thread -> M5
distance between the parallel surfaces -> 34 mm

I think it is less than 1 hour work.
Rechtschreibfehler sind pure Absicht und dienen nur der Belustigung des Lesers. ;)
chrisb
Veteran
Posts: 53786
Joined: Tue Mar 17, 2015 9:14 am

Re: Part-Designer

Post by chrisb »

Tole1970 wrote: Thu Apr 08, 2021 8:26 am The outer thread -> 1,37"x24 BSA 60°
I can give it a try, if someone can give me a pointer what kind of thread this is. Is it diameter and tracks per inch? Or even better, to make it a real community thing: I do the rest, someone else makes the thread.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Tole1970
Posts: 65
Joined: Thu Apr 08, 2021 6:56 am

Re: Part-Designer

Post by Tole1970 »

Thx. It is a bicycle thread for a freewheel. 1.37 inch diameter and 24 turns per inch.
Rechtschreibfehler sind pure Absicht und dienen nur der Belustigung des Lesers. ;)
FreeCADpro
Posts: 9
Joined: Tue Sep 22, 2020 8:25 am

Re: Part-Designer

Post by FreeCADpro »

I can make this work with 25 euro.
Tole1970
Posts: 65
Joined: Thu Apr 08, 2021 6:56 am

Re: Part-Designer

Post by Tole1970 »

FreeCADpro wrote: Thu Apr 08, 2021 4:27 pm I can make this work with 25 euro.
Thx, for your offer. I will wait for the try of chrisb and if it does not work, than you can do it.
Rechtschreibfehler sind pure Absicht und dienen nur der Belustigung des Lesers. ;)
FreeCADpro
Posts: 9
Joined: Tue Sep 22, 2020 8:25 am

Re: Part-Designer

Post by FreeCADpro »

ok :)
thanks
chrisb
Veteran
Posts: 53786
Joined: Tue Mar 17, 2015 9:14 am

Re: Part-Designer

Post by chrisb »

I will do it in a couple of hours, have to go now.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Post Reply