Part Design Workbench icons aligned to guidelines

A forum for research and development of the user interface of FreeCAD
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
wojtekm
Posts: 3
Joined: Fri Feb 24, 2017 3:17 am

Re: Part Design Workbench icons aligned to guidelines

Post by wojtekm »

Great work!

May I ask you to do something similar also with this...? :roll:
Attachments
FreeCAD_icons.png
FreeCAD_icons.png (10.62 KiB) Viewed 1195 times
User avatar
agryson
Posts: 463
Joined: Wed Nov 23, 2016 8:30 am
Location: Bordeaux, France
Contact:

Re: Part Design Workbench icons aligned to guidelines

Post by agryson »

wojtekm wrote:May I ask you to do something similar also with this...?
Of course, I'm working through all the workbenches before getting to the core icons. You can track my progress on my fork.
I'm currently about 25% done with FEM, then will tackle assembly. Once that's done I can move on to the core icons. If you need a timeline, I expect about 4 to 6 weeks before I'm done.
wojtekm
Posts: 3
Joined: Fri Feb 24, 2017 3:17 am

Re: Part Design Workbench icons aligned to guidelines

Post by wojtekm »

Great! I'm very excited about your work, and FreeCAD progress in general. :D
User avatar
bill
Posts: 376
Joined: Fri Jan 09, 2015 9:25 pm

Re: Part Design Workbench icons aligned to guidelines

Post by bill »

In that discussion of changing/renaming "THICKNESS" in another thread , maybe the word your searching for is "WALL (dim./thickness)". Just a suggestion!
Post Reply