Template Grid Shows Through Object After Scaling

Discussions about the development of the TechDraw workbench
mendy
Posts: 29
Joined: Mon May 21, 2018 2:16 pm

Template Grid Shows Through Object After Scaling

Postby mendy » Tue Sep 10, 2019 3:48 pm

Hi would it be possible to verify this? I insert view of center objects and they are good. Then when I scale to 75% (doesn't seem to matter of percentage) the grid on my template shows through on two corners of the guards. Tried with different visibility settings in main drawing. Not a big problem as I can switch to my no grid template. Also had to set arbitrary value for bolt hole to bottom and can't seem to get radius/diameter of bolt holes but probably error on my end but last two updates borked my sketcher, once it is back I will see what my error on that is.
Attachments
Acrylic Heat Bender Guards 0.19.FCStd
(120.94 KiB) Downloaded 2 times
reox
Posts: 628
Joined: Sat Aug 13, 2016 10:06 am
Contact:

Re: Template Grid Shows Through Object After Scaling

Postby reox » Tue Sep 10, 2019 5:13 pm

Do you mean this?
2019-09-10-191024_813x554_scrot.png
2019-09-10-191024_813x554_scrot.png (50.74 KiB) Viewed 95 times
I can verify in

Code: Select all

OS: Debian GNU/Linux bullseye/sid (i3/i3)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.18149 (Git)
Build type: Release
Branch: master
Hash: fb5d7fa076d9cfa00c5ef343e061275c7b558ab5
Python version: 3.7.4+
Qt version: 5.11.3
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Austria (de_AT)
mendy
Posts: 29
Joined: Mon May 21, 2018 2:16 pm

Re: Template Grid Shows Through Object After Scaling

Postby mendy » Tue Sep 10, 2019 6:16 pm

Thank you for verifying, will switch project to my no grid template for this project.
Forgot to include info, actual file was done in two versions before this.

OS: Ubuntu 18.04.3 LTS (MATE/mate)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.
Build type: Release
Python version: 3.6.8
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
wandererfan
Posts: 2882
Joined: Tue Nov 06, 2012 5:42 pm

Re: Template Grid Shows Through Object After Scaling

Postby wandererfan » Wed Sep 11, 2019 1:44 pm

mendy wrote:
Tue Sep 10, 2019 3:48 pm
Then when I scale to 75% (doesn't seem to matter of percentage) the grid on my template shows through on two corners of the guards.
Happens here with any scale != 1.0. The fillet is not detected as a Face for some reason - could be the little arc in the upper right.

Good test data though - thanks!
transparentFaceCloseUp.png
transparentFaceCloseUp.png (26.58 KiB) Viewed 61 times