Version 0.19 TechDraw problem

Discussions about the development of the TechDraw workbench
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
User avatar
kaktus
Veteran
Posts: 1174
Joined: Sun Aug 11, 2019 11:59 am
Location: opolskie
Contact:

Re: Version 0.19 TechDraw problem

Post by kaktus »

:D

I think this information will be helpful to the developer.
In a way, it is a guideline on how to determine the font size.
;)
Twórca polskiej wersji Wiki dla FreeCAD, współwórca polskiej wersji GUI.
"Cierpliwym być musisz, by wiedzę zgłębiać tajemną, gdyż ciemna strona mocy niszczącą i silną jest".
User avatar
wandererfan
Veteran
Posts: 6265
Joined: Tue Nov 06, 2012 5:42 pm
Contact:

Re: Version 0.19 TechDraw problem

Post by wandererfan »

Pafnutij wrote: Sat May 14, 2022 11:25 am Too bad.
Maybe the bug or the feature will be fixed in one of the next versions, that like in version 0.18 a 5mm text is also 5mm high.
I've found a solution that seems to work. If we ask for 5mm text, then measure (programmatically) what the system actually produces, calculate an adjustment factor, then ask for (5 * adjustment)mm text, we get 5mm text on the page.

This solution requires touching a lot of code, so it won't happen for v0.20, but it should be available for v0.21
Pafnutij
Posts: 13
Joined: Sat Nov 21, 2020 1:54 pm

Re: Version 0.19 TechDraw problem

Post by Pafnutij »

That's good news. I like to wait for 0.21. Thanks.
Post Reply