[SOLVED] LineGroup::invalid entry in LineGroup.csv

Discussions about the development of the TechDraw workbench
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
User avatar
kaktus
Veteran
Posts: 1174
Joined: Sun Aug 11, 2019 11:59 am
Location: opolskie
Contact:

Re: LineGroup::invalid entry in LineGroup.csv

Post by kaktus »

You made each feature individually.

I treated the first operation pocket "roughly" so as to harness it.
Note that the sketch that this operation performs has an inner and outer contour.
I drew the protuberances in the sketch using the "Mirror" operation.
I rather didn't work hard on this sketch. ;)

Each of us came to our goal through our own path, showing the different capabilities of FreeCAD, and that's cool. :idea:
Twórca polskiej wersji Wiki dla FreeCAD, współwórca polskiej wersji GUI.
"Cierpliwym być musisz, by wiedzę zgłębiać tajemną, gdyż ciemna strona mocy niszczącą i silną jest".
User avatar
wandererfan
Veteran
Posts: 6265
Joined: Tue Nov 06, 2012 5:42 pm
Contact:

Re: LineGroup::invalid entry in LineGroup.csv

Post by wandererfan »

kaktus wrote: Thu Jul 07, 2022 7:08 am By the way, the name of the option "Line Width Group" is uncommunicative to me. :roll:
Each entry in the csv file defines a group of 4 line widths. Not sure what else to call it.
User avatar
kaktus
Veteran
Posts: 1174
Joined: Sun Aug 11, 2019 11:59 am
Location: opolskie
Contact:

Re: LineGroup::invalid entry in LineGroup.csv

Post by kaktus »

I guessed when I learned the functionality of this option.
And I know that choosing the right name is not always easy.
But in such cases, a well-designed hint should dispel any doubts. ;)

Another complication is that for different nationalities certain terms are not synonymous.
Twórca polskiej wersji Wiki dla FreeCAD, współwórca polskiej wersji GUI.
"Cierpliwym być musisz, by wiedzę zgłębiać tajemną, gdyż ciemna strona mocy niszczącą i silną jest".
User avatar
kaktus
Veteran
Posts: 1174
Joined: Sun Aug 11, 2019 11:59 am
Location: opolskie
Contact:

Re: LineGroup::invalid entry in LineGroup.csv

Post by kaktus »

Maybe if the word "group" was replaced by something else it could be more friendly.

How about the term "set of line thicknesses" or something similar ....
Twórca polskiej wersji Wiki dla FreeCAD, współwórca polskiej wersji GUI.
"Cierpliwym być musisz, by wiedzę zgłębiać tajemną, gdyż ciemna strona mocy niszczącą i silną jest".
Post Reply