Template Grid Shows Through Object After Scaling
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Template Grid Shows Through Object After Scaling
Hi would it be possible to verify this? I insert view of center objects and they are good. Then when I scale to 75% (doesn't seem to matter of percentage) the grid on my template shows through on two corners of the guards. Tried with different visibility settings in main drawing. Not a big problem as I can switch to my no grid template. Also had to set arbitrary value for bolt hole to bottom and can't seem to get radius/diameter of bolt holes but probably error on my end but last two updates borked my sketcher, once it is back I will see what my error on that is.
- Attachments
-
- Acrylic Heat Bender Guards 0.19.FCStd
- (120.94 KiB) Downloaded 20 times
Re: Template Grid Shows Through Object After Scaling
Do you mean this?
I can verify in
Code: Select all
OS: Debian GNU/Linux bullseye/sid (i3/i3)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.18149 (Git)
Build type: Release
Branch: master
Hash: fb5d7fa076d9cfa00c5ef343e061275c7b558ab5
Python version: 3.7.4+
Qt version: 5.11.3
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Austria (de_AT)
Re: Template Grid Shows Through Object After Scaling
Thank you for verifying, will switch project to my no grid template for this project.
Forgot to include info, actual file was done in two versions before this.
OS: Ubuntu 18.04.3 LTS (MATE/mate)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.
Build type: Release
Python version: 3.6.8
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
Forgot to include info, actual file was done in two versions before this.
OS: Ubuntu 18.04.3 LTS (MATE/mate)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.
Build type: Release
Python version: 3.6.8
Qt version: 5.9.5
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: English/UnitedStates (en_US)
- wandererfan
- Veteran
- Posts: 6326
- Joined: Tue Nov 06, 2012 5:42 pm
- Contact:
Re: Template Grid Shows Through Object After Scaling
Happens here with any scale != 1.0. The fillet is not detected as a Face for some reason - could be the little arc in the upper right.
Good test data though - thanks!