Re: Hide line and real line problem

Discussions about the development of the TechDraw workbench
felixlee868
Posts: 28
Joined: Wed Jul 03, 2019 8:15 am

Re: Hide line and real line problem

Postby felixlee868 » Wed Oct 16, 2019 2:00 am

I found the problems about cross hide line and real line. When the hide line (Not been seen by directly ) cross the real line ( Can see directly ), the cross parts of two lines is connected. but the specification need the real line and hide line connection part has gap. I hope can fix this bugs

Thanks
User avatar
wandererfan
Posts: 3485
Joined: Tue Nov 06, 2012 5:42 pm

Re: Hide line and real line problem

Postby wandererfan » Wed Oct 16, 2019 1:16 pm

felixlee868 wrote:
Wed Oct 16, 2019 2:00 am
I found the problems about cross hide line and real line. When the hide line (Not been seen by directly ) cross the real line ( Can see directly ), the cross parts of two lines is connected. but the specification need the real line and hide line connection part has gap. I hope can fix this bugs
Current situation:
HiddenVisibleCross.png
HiddenVisibleCross.png (24.33 KiB) Viewed 332 times
But should be like this:
HiddenVisibleCross_correct.png
HiddenVisibleCross_correct.png (2.04 KiB) Viewed 332 times

Correct?

I think this is a difficult fix.

Is this an actual ISO or ASME requirement?
felixlee868
Posts: 28
Joined: Wed Jul 03, 2019 8:15 am

Re: Hide line and real line problem

Postby felixlee868 » Wed Oct 16, 2019 10:28 pm

The second pic is right.

when I learned the engineering drawing class. the teacher point the detail error like first picture.