[Solved] Wrong orientations,... in DetailView

Discussions about the development of the TechDraw workbench
IngoMeier
Posts: 29
Joined: Mon Sep 30, 2019 12:51 pm

[Solved] Wrong orientations,... in DetailView

Postby IngoMeier » Tue Oct 22, 2019 7:15 am

Solved with version 0.19.18620

Hi!
Seems to be similiar to (or same as):
Problems with DetailView (False Dimension) -> PR1786
[Solved] problems with DetailView -> git commit d48d014eb9
but still not solved (or back) in Version: 0.18.16131 (Git) or in Version: 0.19.18542 (Git)
Test_DetailView2.png
Test_DetailView2.png (197.22 KiB) Viewed 653 times
Only Detail of Front and Detail6 of Bottom are ok.

Changing Rotation and Direction seems to have no (visible) effect.

Thanks,
Ingo
Test_DetailView2.FCStd
(54.65 KiB) Downloaded 10 times
OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16131 (Git)
Build type: Release
Branch: releases/FreeCAD-0-18
Hash: 3129ae4296e40ed20e7b3d460b86e6969acbe1c3
Python version: 3.6.6
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: German/Germany (de_DE)
Last edited by IngoMeier on Wed Oct 30, 2019 2:40 pm, edited 4 times in total.
chrisb
Posts: 21384
Joined: Tue Mar 17, 2015 9:14 am

Re: Wrong orientations,... in DetailView

Postby chrisb » Tue Oct 22, 2019 8:59 am

Can you verify if it's solved in 0.19?
IngoMeier
Posts: 29
Joined: Mon Sep 30, 2019 12:51 pm

Re: Wrong orientations,... in DetailView

Postby IngoMeier » Tue Oct 22, 2019 9:54 am

Hi Chris,

just tried with Version: 0.19.18542 (Git) -> it is the same.
Even recreated some DetailViews and made changes in the Sketch. -> still wrong

It is the 0.19_pre version of FreeCAD. Or did you have another Version in mind?
If yes, where to find it?

Thanks,
Ingo
chrisb
Posts: 21384
Joined: Tue Mar 17, 2015 9:14 am

Re: Wrong orientations,... in DetailView

Postby chrisb » Tue Oct 22, 2019 11:32 am

That's the version I had in mind.
User avatar
wandererfan
Posts: 3482
Joined: Tue Nov 06, 2012 5:42 pm

Re: Wrong orientations,... in DetailView

Postby wandererfan » Wed Oct 23, 2019 11:42 pm

IngoMeier wrote:
Tue Oct 22, 2019 7:15 am
Seems to be similiar to (or same as):
Should be fixed by git commit 789733d691
DetailOrientationDPG.png
DetailOrientationDPG.png (52.3 KiB) Viewed 496 times
IngoMeier
Posts: 29
Joined: Mon Sep 30, 2019 12:51 pm

Re: Wrong orientations,... in DetailView

Postby IngoMeier » Thu Oct 24, 2019 7:55 am

Hi Chris,

thank you very much!

Will this go into 0.18.4 and 0.19?


Thanks,
Ingo
chrisb
Posts: 21384
Joined: Tue Mar 17, 2015 9:14 am

Re: Wrong orientations,... in DetailView

Postby chrisb » Thu Oct 24, 2019 8:30 am

IngoMeier wrote:
Thu Oct 24, 2019 7:55 am
Hi Chris,

thank you very much!
Herewith I forward your thanks to Master Of TechDraw wandererfan.
IngoMeier
Posts: 29
Joined: Mon Sep 30, 2019 12:51 pm

Re: Wrong orientations,... in DetailView

Postby IngoMeier » Thu Oct 24, 2019 11:12 am

By "Chris" I mainly meant wandererfan. (But take the thanks for your work too!)
Isn't "Chris" his Name?

Found it here:
https://forum.freecadweb.org/viewtopic. ... 474#p25474
chrisb
Posts: 21384
Joined: Tue Mar 17, 2015 9:14 am

Re: Wrong orientations,... in DetailView

Postby chrisb » Thu Oct 24, 2019 12:46 pm

I hadn't realized that he got one of these seldom used fantastic names.
User avatar
wandererfan
Posts: 3482
Joined: Tue Nov 06, 2012 5:42 pm

Re: Wrong orientations,... in DetailView

Postby wandererfan » Thu Oct 24, 2019 2:13 pm

IngoMeier wrote:
Thu Oct 24, 2019 7:55 am
Will this go into 0.18.4 and 0.19?
It is in the master source code for 0.19 now. Any v0.19 executables built from here on should include it.

Should be possible to back port to 18, but I'll have to look.

To Wiser Heads: does this meet the criteria for backports?