I have an interesting problem I would like to solve.
When applying a section cut to an ARCH model, say of a house, the section cut goes across walls and structures that are constructed from concrete, wood, dirt, ... And all of the cut surfaces are hatched using specification provided by the "Cut Surface Display" property. In essence, all cut surfaces are displayed identically irregardless of their material.
Is there a way to have specify the hatching on a per-cut-face basis?
-David
Hatching Cut Surfaces in Section Views
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
- wandererfan
- Veteran
- Posts: 6326
- Joined: Tue Nov 06, 2012 5:42 pm
- Contact:
Re: Hatching Cut Surfaces in Section Views
This is not possible in the current version. I have started work on it a couple of times, but it has so far always been bumped by higher priorities.elsordo wrote: ↑Sat Jul 25, 2020 2:25 am When applying a section cut to an ARCH model, say of a house, the section cut goes across walls and structures that are constructed from concrete, wood, dirt, ... And all of the cut surfaces are hatched using specification provided by the "Cut Surface Display" property. In essence, all cut surfaces are displayed identically irregardless of their material.
Is there a way to have specify the hatching on a per-cut-face basis?
Re: Hatching Cut Surfaces in Section Views
Thanks for the reply.
FC has become a very useful tool.
-David
FC has become a very useful tool.
-David