I have done this roof pattern to share, it's ready to be used in TD.
[here you have 4 orientation of the roof patterns because TD cannot make any angle orientation on hatching patterns that's could be a very useful feature request in TD ]
Roof hatching pattern for TD
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
- ragohix769
- Posts: 568
- Joined: Sat Jul 18, 2020 7:04 am
- Location: Rome - Italy
Roof hatching pattern for TD
- Attachments
-
- tetto_mio_mat_7_SX.svg
- (9.74 KiB) Downloaded 65 times
-
- tetto_mio_mat_7_DOWN.svg
- (9.75 KiB) Downloaded 65 times
-
- tetto_mio_mat_7_DX.svg
- (9.74 KiB) Downloaded 71 times
-
- tetto_mio_mat_7.svg
- (9.73 KiB) Downloaded 72 times
After #ElonMuskBuyTwitter I'm no more on Twitter, that's really enough
=> Now you can find me here on #Mastodon: https://mastodon.uno/@opensoul - I hope more people do the same
=> Now you can find me here on #Mastodon: https://mastodon.uno/@opensoul - I hope more people do the same