Hi,
I created a small Python script witch creates me a sheet template for both TechDraw and KiCAD and I wanted to ask your opinion and maybe also your ideas for improvements.
https://github.com/tobiasfalk/KiCAD-Fre ... -Generator
Template genreator
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
- tobiasfalk
- Posts: 93
- Joined: Fri Feb 05, 2021 2:35 pm
Template genreator
- Attachments
-
- ISO_216_A4L_ISO_5457-1999_ISO_7200-2004.freecad.svg
- (10.71 KiB) Downloaded 45 times
-
- ISO_216_A4L_ISO_5457-1999_ISO_7200-2004.svg
- (10.59 KiB) Downloaded 30 times
-
- ISO_216_A3_ISO_5457-1999_ISO_7200-2004.freecad.svg
- (14.29 KiB) Downloaded 31 times
-
- ISO_216_A3_ISO_5457-1999_ISO_7200-2004.svg
- (14.16 KiB) Downloaded 36 times
Re: Template genreator
I have no clue how this GitHub stuff works and so don't know how to test the script(s).
But what I know is that A4 landscape format is more or less useless. It is not recommended since ages. I was told so in the mid 1980s and it wasn't a new insight even back then.
The structure of the svg file is quite ok when indentation is added.
The stroke width of 0.7 and 0.35 is a bit too much for A3 and A4.
But what I know is that A4 landscape format is more or less useless. It is not recommended since ages. I was told so in the mid 1980s and it wasn't a new insight even back then.
The structure of the svg file is quite ok when indentation is added.
The stroke width of 0.7 and 0.35 is a bit too much for A3 and A4.
- tobiasfalk
- Posts: 93
- Joined: Fri Feb 05, 2021 2:35 pm
Re: Template genreator
Hi, I reprogramed the whole think in C++ with Qt and alsow added some more fetures and would like to ask for the opinion from the FreeCAD Comunety. In the release there is alsow a precompield version for Windows and I hope that the Readme explains everything that is needed.
https://github.com/tobiasfalk/KiCAD-Fre ... -Generator
Greeteings
Tobias
https://github.com/tobiasfalk/KiCAD-Fre ... -Generator
Greeteings
Tobias
-
- Posts: 526
- Joined: Mon Feb 27, 2017 5:33 am
- Location: Australia
Re: Template genreator
I had a quick browse through the files on GitHub Tobias. You have put a lot of work into this. I like what I have seen. I am a bit strapped for time at the moment but I will try them out for sure in the near future.tobiasfalk wrote: ↑Fri Oct 07, 2022 7:20 am Hi, I reprogramed the whole think in C++ with Qt and alsow added some more fetures and would like to ask for the opinion from the FreeCAD Comunety. In the release there is alsow a precompield version for Windows and I hope that the Readme explains everything that is needed.
https://github.com/tobiasfalk/KiCAD-Fre ... -Generator
Greeteings
Tobias