Hello !
After asking a lot, it's my time to share !
i wrote a quick document to set tips and solutions i found
during my 0.17 learning curve.
It's a point of view of a 0.16 user who needs to forget and learn again, it can be helpfull for other and time saver.
Don't hesitate to post, comment and leave me message, hope this help !
https://1drv.ms/b/s!AnNgkxFsu9Xrgqh367kWan6EBeYwWA
Freecad 0.16 to 0.17 quick wins
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: Freecad 0.16 to 0.17 quick wins
Thanks for sharing.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Freecad 0.16 to 0.17 quick wins
One more, when you do a Boolean of Bodies, you are not really able to get to the geometry inside the Bodies, but if you select the Boolean in the tree and change the View property "Display" from "Results" to "Tools" then you will be in sort of edit mode and will be able to see and work with it normally. But remember to set it back to "Results" once you are done.
Re: Freecad 0.16 to 0.17 quick wins
thanks saso, i will have a look at it, currently upgrading my ubuntu because it seems i dont have last freecad dily update... i will update doc regarding my success boolean operation
Re: Freecad 0.16 to 0.17 quick wins
Thank you very much for the document.
- HarryGeier
- Veteran
- Posts: 1231
- Joined: Mon Jul 10, 2017 12:36 pm
- Location: Hof Germany
Re: Freecad 0.16 to 0.17 quick wins
Nice made...
Better than a lot of Youtube bla bla and musical stuff...
Better than a lot of Youtube bla bla and musical stuff...
Kaum macht man´s richtig , gehts´s
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/
My Video Tutorials on Youtube: https://www.youtube.com/channel/UCoe3B ... p8Q/videos
My FreeCAD Stuff on Hidrive: https://my.hidrive.com/share/qr3l1yddy6#$/
Re: Freecad 0.16 to 0.17 quick wins
Thank you Harry
I've just updated it to take in account Norman posts and other feedback. I also inserted links to Wiki pages created by Norman (information published on Google+) regarding body and boolean.
Changelog :
---------------
- additional information (fix) on "Part" usage
- detail on boolean operation in PartDesign Next workbench, regarding answers to my questions, on some trouble i had, and forum reading about it.
++
I've just updated it to take in account Norman posts and other feedback. I also inserted links to Wiki pages created by Norman (information published on Google+) regarding body and boolean.
Changelog :
---------------
- additional information (fix) on "Part" usage
- detail on boolean operation in PartDesign Next workbench, regarding answers to my questions, on some trouble i had, and forum reading about it.
++