With the spindelmotor of my CNC-router comes a frequency converter like this one: frequency converter
It has no plugs or an OnOff-switch.
Here the wishlist:
- - An extra housing
- OnOff-Switch (yes, the same as above)
- Powerplug (the same as the controller has)
- Switch 'Auto/Manual'
- Plug for the automatic control with the CNC controller
- Poti 'Manual speed setting'
- Switch 'Manual Start/Stop'
- Status-LEDs to see the automatic Signals from the controller 'Start/Stop' , 'CW/CCW' direction
(the 'number of revolutions' i can follow at the display on the frequency converter
- AddOnFC
- 0_Pictures
1_Parts
2_Assemblies
3_Manufacturing Data
4_KICAD
- 0_Pictures
- CNC_Spindel_FC
- 0_Pictures
1_Parts
2_Assemblies
3_Data_Sheet
- 0_Pictures
Now we can start FreeCAD with A2plus and save new empty files as follow (as shown in green):
- CNC_Spindel_FC
CNC_Spindel_FC_master
CNC_Spindel_FC_asm- 0_Pictures
CNC_Spindel_FC_Front (photo of the front panel)
1_Parts
2_Assemblies
CNC_Spindel_FC_housing_asm
3_Data_Sheet
- 0_Pictures
- AddOnFC
AddOnFC_master
AddOnFC_asm- 0_Pictures
1_Parts
2_Assemblies
AddOnFC_housing_asm
3_Manufacturing Data
4_KICAD
- 0_Pictures
to be continued...