Begin Workflow 1: Add a part to the controller
It should be a master-On-Off-Switch. Questions about the switch:
- Witch one? 230V 16A, with controll light, dustproof, snap in. We need a datasheet: https://cdn-reichelt.de/documents/daten ... B4MASK.pdf
We need a STP-File for the Switch: I found a STEP File it looks near what i need.
- price
the seller
External dimensions of the switch
etc ...
We have to generate the new root-directory for this part at the 'warehouse' under 'electrical' parts named 'OnOff-Switch':
In the folder 'OnOff-Switch' we copy the standard-structure:
- 0_Pictures
1_Parts
2_Assemblies
3_Manufacturing Data
...
So we have this structure for the switch in the 'warehouse':
- global
- warehouse
- electric parts
- OnOff-Switch
- 0_Pictures
1_Parts
2_Assemblies
3_Manufacturing Data
4_DataSheet
- 0_Pictures
etc... - OnOff-Switch
house_B
etc ... - electric parts
- warehouse
Now we can safe the datasheet at the 'datasheet' folder and the STEP-File to the 'Parts' folder.
Now we can start FreeCAD with A2plus...
We have to generate four new files and safe them to the right folder:
- a.) 'OnOff_Switch_master' in the root folder 'OnOff-Switch' (in there comes later the 'transparency structure')
b.) 'OnOff-Switch_asm' in the root folder 'OnOff-Switch' (in there we bind later all the files we need for graphic illustration)
c.) 'OnOff_Switch' in the 'parts' folder (in there we bind later the STEP File and the 'Info' of the OnOff-Switch)
d.) 'OnOff_Switch_man' in the 'manufactoring_Data' folder (in it comes the drawing for the breakthrough through the front panel)
a.)