How can I draw a hatch in sketch with FreeCad software in CAD design? Can you give any picture or video tutorial for this? The link contains the sketch.
https://drive.google.com/file/d/1Uh8san ... p=drivesdk
I also try it with Techdraw and Draft workbench. But.....
I draw a sketch by sketch workbench and export it as svg formate. Then open it in Techdraw workbench to draw hatch.But if I take the mouse pointer on the sketch, it does not turn yellow and many tools of Techdraw workbench are not working.What is the reason of this?
https://drive.google.com/file/d/1VUh7KE ... p=drivesdk
I also try it with Draft workbench and I don't understand anything.
P.S. I am completely new in CAD designing. Would anyone help me please?
Please make a tutorial for this sketch
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Be nice to others! Respect the FreeCAD code of conduct!
Re: Please make a tutorial for this sketch
Hi and welcome to the forum!
The second image shows that you are still using 0.18 - use 0.19 instead with its more than 8000 improvements. And your model is garbled, you don't have a model, only a TechDraw page. You should add the sketch directly to the TechDraw page.
The second image shows that you are still using 0.18 - use 0.19 instead with its more than 8000 improvements. And your model is garbled, you don't have a model, only a TechDraw page. You should add the sketch directly to the TechDraw page.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Please make a tutorial for this sketch
Btw. Your sketch you want to recreate have some missng values.
Re: Please make a tutorial for this sketch
Quick and Dirty