Need tutorial on FC AND drafting/drawing

A place to share learning material: written tutorials, videos, etc.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
pengyou
Posts: 4
Joined: Sun May 20, 2018 12:24 pm

Need tutorial on FC AND drafting/drawing

Post by pengyou »

I have watched tutorials on Freecad but things just don't stick. I think part of the problem is that I am not familiar with the drawing terminology. Is there a tutorial out there that will take me step by step through FC and the drawing jargon?
Top
heda
Veteran
Posts: 1348
Joined: Sat Dec 12, 2015 5:49 pm

Re: Need tutorial on FC AND drafting/drawing

Post by heda »

have you tried relevant parts of Manual:Introduction?
Top
chrisb
Veteran
Posts: 54150
Joined: Tue Mar 17, 2015 9:14 am

Re: Need tutorial on FC AND drafting/drawing

Post by chrisb »

There is a Tutorials section in the wiki. I recommend to start with the PartDesign tutorials.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Top
Post Reply

Return to “Tutorials and videos”