Part design Tutorials and much more ...

A place to share learning material: written tutorials, videos, etc.
Forum rules
Be nice to others! Respect the FreeCAD code of conduct!
Post Reply
User avatar
bntarc
Posts: 50
Joined: Thu Apr 12, 2018 4:30 pm
Location: Illinois USA
Contact:

Part design Tutorials and much more ...

Post by bntarc »

Tutorials by Quentin Plisson

https://grabcad.com/quentin.plisson-1/tutorials

workbench:
Part Design
MetalWB
Sketcher
Part
Draft
FEM
SheetMetal
TechDraw
Inkscape
FCGear
KiCad StepUp
chrisb
Veteran
Posts: 53945
Joined: Tue Mar 17, 2015 9:14 am

Re: Part design Tutorials and much more ...

Post by chrisb »

Comment on exercise 2 Step 5: You should not advocate the repitition of dimensions. Use geometric constraints instead. (I guess that feature mirroring comes later).
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
User avatar
mhalil
Posts: 212
Joined: Tue Dec 01, 2020 6:42 pm
Location: İstanbul / Türkiye
Contact:

Re: Part design Tutorials and much more ...

Post by mhalil »

It would be nice to see information about Curves WB too :D
User avatar
Quentin_Plsn
Posts: 35
Joined: Wed Aug 10, 2022 2:45 pm
Contact:

Re: Part design Tutorials and much more ...

Post by Quentin_Plsn »

Hi @chrisb, thanks for your comment. It was a pedagogical choice not to introduce too many new functions. Looking back, I might have introduced the equality function with the symmetry function as they have a bit of the same purpose.
chrisb
Veteran
Posts: 53945
Joined: Tue Mar 17, 2015 9:14 am

Re: Part design Tutorials and much more ...

Post by chrisb »

Quentin_Plsn wrote: Tue Dec 06, 2022 5:58 am It was a pedagogical choice ...
Yes, I know the problem that there is no end where you can start without needing something else which is introduced later.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Post Reply