Hello
I'm solving propeller wake by simpleFoam. But there is an error which is in the below:
Time step continuity errors : sum local = 9.00875e+65, global = 2.31536e+52 , cumulative = 1.8639e+52
So What may cause this problem? How can I fix that?
Thank you all.
OpenFoam, Propeller, SimpleFoam
Moderator: oliveroxtoby
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
Re: OpenFoam, Propeller, SimpleFoam
Moved to help forum.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: OpenFoam, Propeller, SimpleFoam
Chris, isn't the Help forum about FreeCAD? This topic has no relevance to FreeCAD. Unless the propeller was designed in FreeCAD, I don't see how this question has any relevance at all to any of the FreeCAD forums.
Re: OpenFoam, Propeller, SimpleFoam
I mean, at some point we have to draw a line, if it's not even remotely related to FreeCAD, it has no place on the FreeCAD forum, period.
Re: OpenFoam, Propeller, SimpleFoam
Oops, I'm afraid I moved the wrong topic. Now looking for the other first post.
Now I'm unsure if this belongs to open discussion or FEM.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: OpenFoam, Propeller, SimpleFoam
moved it again.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
- oliveroxtoby
- Posts: 812
- Joined: Fri Dec 23, 2016 9:43 am
- Location: South Africa
Re: OpenFoam, Propeller, SimpleFoam
Your simulation has diverged. This can occur for many different reasons - it is impossible to give a simple answer. If you are able to share your FreeCAD file I can try to have a quick look at it.SajjaD wrote: ↑Sat May 12, 2018 7:06 pm Hello
I'm solving propeller wake by simpleFoam. But there is an error which is in the below:
Time step continuity errors : sum local = 9.00875e+65, global = 2.31536e+52 , cumulative = 1.8639e+52
So What may cause this problem? How can I fix that?
Thank you all.
Please provide all the information requested in this post before reporting problems with CfdOF.