Tutorial 2 _ yes and no

A subforum specific to the development of the OpenFoam-based workbenches ( Cfd https://github.com/qingfengxia/Cfd and CfdOF https://github.com/jaheyns/CfdOF )

Moderator: oliveroxtoby

ljb
Posts: 43
Joined: Tue Sep 04, 2018 3:56 pm

Re: Tutorial 2 _ yes and no

Postby ljb » Thu Sep 27, 2018 11:23 am

Ah ha. The origin is not on the center of the bottom face of the cube.

It is on one corner of the cube.

So 0,0,1 is still on the surface (an edge actually), not inside.

; - )