golfball drag coefficient

A subforum specific to the development of the OpenFoam-based workbenches ( Cfd https://github.com/qingfengxia/Cfd and CfdOF https://github.com/jaheyns/CfdOF )

Moderator: oliveroxtoby

thschrader
Posts: 1403
Joined: Sat May 20, 2017 12:06 pm
Location: Germany

golfball drag coefficient

Postby thschrader » Sun Nov 18, 2018 3:50 pm

Motivation:
https://forum.freecadweb.org/viewtopic.php?f=8&t=32285

Golfball: diameter 45 mm, weight 40 gramms, gives a free-fall speed of 130 km/h (at cf=0,3).
At 130 km/h I get a force of 0,6 N, wich gives a drag-coefficient of 0,49.
Seems a little bit to high. Maybe the dimples are to rough. Or the mesh. Or both.

I ran a laminar steady-state simulation (Re=105000), because cfmesh puts the boundary-elements on a wrong face.
The elements are put at one side of the cube, not at the golfball. Cant figure out why.
Thats the real stuff for a rainy sunday...
model.JPG
model.JPG (82.29 KiB) Viewed 679 times
streamlines.JPG
streamlines.JPG (61.24 KiB) Viewed 679 times
velocity.JPG
velocity.JPG (26.12 KiB) Viewed 679 times
mesh.JPG
mesh.JPG (132.53 KiB) Viewed 679 times
chrisb
Posts: 16947
Joined: Tue Mar 17, 2015 9:14 am

Re: golfball drag coefficient

Postby chrisb » Sun Nov 18, 2018 6:10 pm

Thanks for sharing this. It would be great if you can provide the same for pure sphere of the same diameter.
thschrader
Posts: 1403
Joined: Sat May 20, 2017 12:06 pm
Location: Germany

Re: golfball drag coefficient

Postby thschrader » Sun Nov 18, 2018 9:11 pm

The golfball travels at speeds between 250 (start) and 100 kmh (free-fall),
For a 45 mm ball the Re-numbers are between 100000-200000.
At Re=100000 a smooth sphere has a drag-coefficient of 0,5.
At Re=200000 the drag-coefficient begins to drop down due to flow change from laminar to turbulent.
For rough balls, the flow change happens at much lower Re-numbers (=speed).
https://www.grc.nasa.gov/www/k-12/airpl ... phere.html
https://www.mne.psu.edu/cimbala/me325we ... /intro.pdf

@chris:
I ran a simulation for a smooth sphere (laminar flow, drag-coeffient should be around 0,5 at
Re=100000), but I got a drag of only 0,04, which is obviously wrong.
Here is a nice tutorial, I will try to do that with FC first.
https://mycourses.aalto.fi/pluginfile.p ... enfoam.pdf
sphere_drag.JPG
sphere_drag.JPG (85.49 KiB) Viewed 635 times
UR_
Posts: 871
Joined: Tue Jan 03, 2017 8:42 pm

Re: golfball drag coefficient

Postby UR_ » Sun Nov 18, 2018 9:33 pm

A comparative study of golf ball aerodynamics.png
A comparative study of golf ball aerodynamics.png (45.09 KiB) Viewed 629 times

That's from here: https://people.eng.unimelb.edu.au/imaru ... _Paper.pdf :roll: