Hi all,
I try to run the basic CFD tutorial 1 I found there http://www.opensim.co.za/training.html...
All well done following the tutorial...
But after solver starts, nothing happens (no convergence curves) untill this error message : "Simulation exited with error", few seconds later.
Pleeaase help !
OS: Windows 10
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.18.16117 (Git)
Build type: Release
Branch: releases/FreeCAD-0-18
Hash: dbb4cc6415bac848a294f03b80f65e888d531742
Python version: 3.6.6
Qt version: 5.6.2
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: French/France (fr_FR)
Simulation exited with error
Moderator: oliveroxtoby
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
- oliveroxtoby
- Posts: 840
- Joined: Fri Dec 23, 2016 9:43 am
- Location: South Africa
Re: Simulation exited with error
CFLD wrote: ↑Thu Sep 19, 2019 8:02 pm Hi all,
I try to run the basic CFD tutorial 1 I found there http://www.opensim.co.za/training.html...
All well done following the tutorial...
But after solver starts, nothing happens (no convergence curves) untill this error message : "Simulation exited with error", few seconds later.
Pleeaase help !
Please provide all the information requested in this post before reporting problems with CfdOF.
Re: Simulation exited with error
Well,
Installation and dependencies seem ok.
Saved file here : https://transfernow.net/76cz4240c70e
Screenshot of the problem (ERROR: Failed to post close command error 1726 ERROR: unable to tear down the job tree. exiting...) : https://imgur.com/jeDEhj1
Hope it could help...
Thank you.
Installation and dependencies seem ok.
Saved file here : https://transfernow.net/76cz4240c70e
Screenshot of the problem (ERROR: Failed to post close command error 1726 ERROR: unable to tear down the job tree. exiting...) : https://imgur.com/jeDEhj1
Hope it could help...
Thank you.
- Attachments
-
- erreur cfdof.JPG (67.26 KiB) Viewed 2064 times
- oliveroxtoby
- Posts: 840
- Joined: Fri Dec 23, 2016 9:43 am
- Location: South Africa
Re: Simulation exited with error
The case runs fine on my system. It looks like it could be an MPI error. To confirm, you could try editing the properties of the 'CfdSolver' object and set 'Parallel' to false, and see if it runs. If so, try re-installing BlueCFD and make sure to install MSMPI.CFLD wrote: ↑Thu Sep 26, 2019 8:45 pm Well,
Installation and dependencies seem ok.
Saved file here : https://transfernow.net/76cz4240c70e
Screenshot of the problem (ERROR: Failed to post close command error 1726 ERROR: unable to tear down the job tree. exiting...) : https://imgur.com/jeDEhj1
Hope it could help...
Thank you.
Re: Simulation exited with error
Thank you,
it worked with "parallel" false so I uninstalled and reinstalled BlueCFD and MSMPI → works now !
Thank you again !
it worked with "parallel" false so I uninstalled and reinstalled BlueCFD and MSMPI → works now !
Thank you again !