Hi All,
It looks like CfdOF is ignoring the Wire Screen Parameters in the Porous Baffle BC. No matter what I put in for the wire screen parameters, I get the same results. Looking in the 0 folder in the p file, the Boundary Condition values don't change for different values of Wire Diameter and Spacing.
New to CFD and OF so it's hard to tell if it's me or the software. Am I doing something wrong?
Thanks
--Brian
[SOLVED] Porous Baffle BC Ignoring Wire Screen Parameters
Moderator: oliveroxtoby
Forum rules
and Helpful information for the FEM forum
and Helpful information for the FEM forum
-
- Posts: 5
- Joined: Fri Jul 26, 2019 2:29 pm
[SOLVED] Porous Baffle BC Ignoring Wire Screen Parameters
Last edited by airflowhack on Wed Oct 16, 2019 4:27 am, edited 1 time in total.
- oliveroxtoby
- Posts: 837
- Joined: Fri Dec 23, 2016 9:43 am
- Location: South Africa
Re: Porous Baffle BC Ignoring Wire Screen Parameters
Should be fixed. Thank you for reporting.airflowhack wrote: ↑Wed Oct 09, 2019 7:54 pm Hi All,
It looks like CfdOF is ignoring the Wire Screen Parameters in the Porous Baffle BC. No matter what I put in for the wire screen parameters, I get the same results. Looking in the 0 folder in the p file, the Boundary Condition values don't change for different values of Wire Diameter and Spacing.
New to CFD and OF so it's hard to tell if it's me or the software. Am I doing something wrong?
Thanks
--Brian
-
- Posts: 5
- Joined: Fri Jul 26, 2019 2:29 pm
Re: Porous Baffle BC Ignoring Wire Screen Parameters
Thanks for fixing.
Re: Porous Baffle BC Ignoring Wire Screen Parameters
Please mark thread as [Solved]
thanks
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs