CfdOF problem with initialise flow field

A subforum specific to the development of the OpenFoam-based workbenches ( Cfd https://github.com/qingfengxia/Cfd and CfdOF https://github.com/jaheyns/CfdOF )

Moderator: oliveroxtoby

Forum rules
and Helpful information for the FEM forum
IMPORTANT: Please click here and read this first, before posting on this CfdOF fourm
Post Reply
phongpanott
Posts: 2
Joined: Tue Jul 06, 2021 7:25 am

CfdOF problem with initialise flow field

Post by phongpanott »

I have a problem when I try to set up the initialise flow field in CfdOF. Potential flow, Use value from the boundary and Specify value. And what are the different between them?
Top
chrisb
Veteran
Posts: 54150
Joined: Tue Mar 17, 2015 9:14 am

Re: CfdOF problem with initialise flow field

Post by chrisb »

Moved from Open discussion.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Top
User avatar
r.tec
Posts: 533
Joined: Thu Oct 23, 2014 4:06 pm
Location: Bad Münstereifel, NRW, Germany
Contact:
Contact r.tec

Re: CfdOF problem with initialise flow field

Post by r.tec »

Welcome phongpanott to the forum.

Did you read the advice on top of the forum..."IMPORTANT...." and "Please...."?

What me helped a lot was the video by Pawel. I'd recommend watching it and making notes/screenshots along.
Top
Post Reply

Return to “CfdOF / CFD”