Export structural analysis data to IFC

This forum section is only for IFC-related issues
User avatar
bernd
Posts: 6880
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland

Re: Export structural analysis data to IFC

Postby bernd » Wed Feb 06, 2019 4:51 pm

Tandy:

would be cool if you could test strctural analysis ifc import in FreeCAD! so far it has only been tested with AxisVM and Etab software. But there are dozens of analysis software out there able to write structural analysis view.
User avatar
Tandy
Posts: 16
Joined: Thu Oct 04, 2018 3:06 pm
Location: FEROZEPUR,PUNJAB,INDIA

Re: Export structural analysis data to IFC

Postby Tandy » Sat Feb 09, 2019 3:46 am

bernd wrote:
Wed Feb 06, 2019 4:51 pm
Tandy:

would be cool if you could test strctural analysis ifc import in FreeCAD! so far it has only been tested with AxisVM and Etab software. But there are dozens of analysis software out there able to write structural analysis view.
I had also tested same softwares in freeCAD .
I am researching from last 4 months but not able to find more software which can export structural analysis to IFC .
I had worked with many softwares of Bentley, AutoDesk, Trimble
Please guide Sir me if you know any such software which can export structural analysis data to IFC so that i can read and understand them to use in freeCAD and will work on that software too.
Tandeep singh
User avatar
Tandy
Posts: 16
Joined: Thu Oct 04, 2018 3:06 pm
Location: FEROZEPUR,PUNJAB,INDIA

Re: Export structural analysis data to IFC

Postby Tandy » Sat Feb 09, 2019 3:52 am

bernd wrote:
Wed Feb 06, 2019 4:44 pm
import of gemetric structural analysis member is supported. You need to activate it in preferences.

Export has been on my TODO for years. At least the Arch Structural Axis objects. Would be a good GSoC project. Are you interested?

BTW. Tekla and Allplan are CAD with structural analysis support.

I somehow missed this topic ...
Sir i am interested in doing this export work and at present working on it .
We are interested in Doing it as GSoC project .
Tandeep singh
User avatar
bernd
Posts: 6880
Joined: Sun Sep 08, 2013 8:07 pm
Location: Zürich, Switzerland

Re: Export structural analysis data to IFC

Postby bernd » Tue Feb 12, 2019 9:54 am

As said:

CAD software exporting strutural analysis view:
- Nemtschek Allplan
- Tekla Structures

Analysis Software exporting structural analysis view:
- RFEM
- AxisVM
- ETAB
- InfoCAD
- SCIA
- Sofistik

There might be even more CAD or Analysis software around ...

As said would be cool if you could test the import of Structural Analysis IFC in FreeCAD. Apart from me it was only tested shortly by ebrahim (https://connect.allplan.com/de/forum/th ... tPage%5D=2)
User avatar
Tandy
Posts: 16
Joined: Thu Oct 04, 2018 3:06 pm
Location: FEROZEPUR,PUNJAB,INDIA

Re: Export structural analysis data to IFC

Postby Tandy » Tue Feb 12, 2019 9:59 am

I am starting working on them from today only and give you updates soon.
Tandeep singh