If I check http://www.buildingsmart-tech.org/ifc/I ... common.htm I do not get the same properties as I see in FreeCAD. Notably missing is such important fields such as Reference. Also, there is a Description field, which should not exist according to the spec. Am I doing something wrong, or are FreeCAD's properties out of date?
[SOLVED] Wrong properties in Pset_FurnitureTypeCommon?
[SOLVED] Wrong properties in Pset_FurnitureTypeCommon?
Last edited by Moult on Sat Jan 26, 2019 4:02 am, edited 1 time in total.
I also blog about 3D rendering, architecture, software and other on thinkMoult.com. RSS / Atom feed available for your convenience.
Re: Wrong properties in Pset_FurnitureTypeCommon?
You're right, strange... It look that has changed. I'll regenerate them. (FYI the tools to generate them are in https://github.com/yorikvanhavre/BIM_Wo ... ster/utils
They are used to generate this psets definitions file: https://github.com/FreeCAD/FreeCAD/tree ... ch/Presets
I want to work more on these tools to allow users to regenerate their own csv file, but stll haven't found time to do so
They are used to generate this psets definitions file: https://github.com/FreeCAD/FreeCAD/tree ... ch/Presets
I want to work more on these tools to allow users to regenerate their own csv file, but stll haven't found time to do so
Re: Wrong properties in Pset_FurnitureTypeCommon?
Thanks for the tip! I noticed you hadn't yet regenerated them, so I did it for you I had to do a bit of manual filtering as some data was a bit borky. (notably, missing DataType fields). I have reported the issues on the BSI forums.
https://github.com/yorikvanhavre/BIM_Workbench/pull/17
https://forums.buildingsmart.org/t/brok ... y-sets/890
If you want, should I also submit a PR of the updated file to the FreeCAD repo?
https://github.com/yorikvanhavre/BIM_Workbench/pull/17
https://forums.buildingsmart.org/t/brok ... y-sets/890
If you want, should I also submit a PR of the updated file to the FreeCAD repo?
I also blog about 3D rendering, architecture, software and other on thinkMoult.com. RSS / Atom feed available for your convenience.
Re: Wrong properties in Pset_FurnitureTypeCommon?
Thanks for both PRs!
Later on all that stuff should be unified either in Arch or in BIM to avoid the duplication. Maybe better in BIM, as it's easier to update
Later on all that stuff should be unified either in Arch or in BIM to avoid the duplication. Maybe better in BIM, as it's easier to update
Re: [SOLVED] Wrong properties in Pset_FurnitureTypeCommon?
Where is this nice property editor? In FreeCAD or in FreeCAD BIM WB?
Re: [SOLVED] Wrong properties in Pset_FurnitureTypeCommon?
There is a much better one in BIM WB, that I need to port back to Arch...