IFC import fails in v0.19

[renatorivo]

When I import Yorik's House in version 0.19 FreeCAD crashes with this error

errore casayorik.PNG (27.76 KiB) Viewed 312 times

casayorik-bimvision.PNG (64.97 KiB) Viewed 312 times

CasaYorik.ifc

(67.03 KiB) Downloaded 10 times

OS: Windows 8.1 (6.3)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.18644 (Git)
Build type: Release
Branch: master
Hash: 481870be2b48ef95b59acf1440b069d42b6fad23
Python version: 3.6.7
Qt version: 5.12.1
Coin version: 4.0.0a
OCC version: 7.3.0
Locale: Italian/Italy (it_IT)

Even importing other IFC files creates errors and fails. See https://forum.freecadweb.org/viewtopic.php?f=28&t=40576 ( Italian forum)

[bernd]

run the following code in FreeCAD

Code: Select all

import ifcopenshell
ifcfile = "C:/Users/BHA/Downloads/CasaYorik.ifc"
f = ifcopenshell.open(ifcfile)
f.by_type('IfcProject')

ifcopenshell does not find a IfcProject and thus FreeCAD hangs. We should fix the crash in a first step.

Code: Select all

>>> 
>>> import ifcopenshell
>>> ifcfile = "C:/Users/BHA/Downloads/CasaYorik.ifc"
>>> f = ifcopenshell.open(ifcfile)
>>> f.by_type('IfcProject')
[]
>>> 

but if the file is opened in an editor there is a IfcProject

Code: Select all

#20=IFCPROJECT('d90775e9_7071_491c_a93',#5,'house',$,$,$,$,(#11),#19);

In a second step the question is, why does ifcopenshell does not find the IfcProject if there is one.

BTW: the file was exported with FreeCAD on 5th of march in 2016. Might be there is a problem with the file.

[bernd]

... ifcopenshell does not find a IfcProject and thus FreeCAD hangs. We should fix the crash in a first step. ...

git commit 64cf85c

[bernd]

more informations. It seams IFC4 related ...

Attached two simple ifc exported from Allplan one is ifc2x3, one is ifc4. The ifc2x3 works great whereas for the ifc4 no IfcProject is found ...

Code: Select all

import ifcopenshell
ifcopenshell.open("C:/Users/BHA/Desktop/box_ifc2x3.ifc").by_type('IfcProject')
ifcopenshell.open("C:/Users/BHA/Desktop/box_ifc4.ifc").by_type('IfcProject')

Code: Select all

>>> 
>>> import ifcopenshell
>>> ifcopenshell.open("C:/Users/BHA/Desktop/box_ifc2x3.ifc").by_type('IfcProject')
[#35=IfcProject()]
>>> ifcopenshell.open("C:/Users/BHA/Desktop/box_ifc4.ifc").by_type('IfcProject')
[]
>>> 

box_ifc2x3.ifc

(7.86 KiB) Downloaded 7 times

box_ifc4.ifc

(7.75 KiB) Downloaded 7 times

[bernd]

issue on ifcopenshell is created: https://github.com/IfcOpenShell/IfcOpenShell/issues/711

[bernd]

Code: Select all

import ifcopenshell
ifcopenshell.version
ifcopenshell.schema_identifier

Code: Select all

>>> ifcopenshell.version
'0.5.0-rc1'
>>> ifcopenshell.schema_identifier
'IFC2X3'
>>> 
 

In ifcopenshell 0.5 you only can parse one IFC version. The one included in FreeCAD is IFC2x3. If y IFC4 file is parsed with this it might work or might not work. It seams not to work.

[hlg]

Can you verify that this version of IFCOpenShell can actually handle IFC4? Earlier versions needed to be compiled for a specific IFC schema version, either IFC2x3 or IFC4. I believe the version included in releases is the one compiled for IFC2x3 so far. Try this to check:

Code: Select all

>>> import ifcopenshell
>>> ifcopenshell.schema_identifier
'IFC2X3'
>>> ifcopenshell.version
'0.5.0-dev'

[bernd]

@hlg: cross post ... by the time you posted I edited my post ...

Just tested with ifcopenshell 0.6 which can handle IFC2x3 and IFC4 ...

Code: Select all

import ifcopenshell
ifcopenshell.version

>>> import ifcopenshell
>>> ifcopenshell.version
'0.6.0b0'

good news ...

[bernd]

find more informations in this regard here ... https://forum.freecadweb.org/viewtopic.php?p=311656

[renatorivo]

Thanks!