It looks like that the meshing works fine in the mesh design WB, but fails in the FEM WB.
I build on a machine using debian unstable, the full build log can be found here: https://files.reox.at/.buildlog/freecad ... 4_0013.txt
For me, this looks like either some dependency is wrong, or I use the wrong flags.
Is it possible that the SMESH library is too old, when the internal version is used?
But currently there is no salomes mesh in debian IMO.
For the package versions installed, please consult the build log (just grep for "Setting up " in the log)
Summary:
Code: Select all
00:18:34 O: -- Python: [/usr/bin/python3] [.cpython-37m-x86_64-linux-gnu]
00:18:34 O: -- PCL: 1.9.1
00:18:34 O: -- pybind11: 2.2.4
00:18:34 O: -- Boost: 106700
00:18:34 O: -- XercesC: [/usr/lib/x86_64-linux-gnu/libxerces-c.so] [/usr/include]
00:18:34 O: -- ZLIB: 1.2.11
00:18:34 O: -- PyCXX: [/build/freecad-daily-0.19+git201906240013~daily/src]
00:18:34 O: -- OCC: 7.3.0 [TKFillet;TKMesh;TKernel;TKG2d;TKG3d;TKMath;TKIGES;TKSTL;TKShHealing;TKXSBase;TKBin;TKBool;TKBO;TKCDF;TKBRep;TKTopAlgo;TKGeomAlgo;TKGeomBase;TKOffset;TKPrim;TKSTEP;TKSTEPBase;TKSTEPAttr;TKHLR;TKFeat]
00:18:34 O: -- SMESH: build internal
00:18:34 O: -- MEDFile: [/usr/lib/x86_64-linux-gnu/libmedC.so] [/usr/include]
00:18:34 O: -- HDF5: 1.10.4
00:18:34 O: -- VTK: 7.1.1
00:18:34 O: -- NETGEN: 6.2-dev [-DNO_PARALLEL_THREADS;-DOCCGEOMETRY;-DNETGEN_VERSION=393728] [] [/usr/include/netgen/include;/usr/include/netgen] [nglib] [/usr/include/netgen/include;/usr/include/netgen]
00:18:34 O: -- SWIG: 3.0.12
00:18:34 O: -- Eigen3 3.3.7
00:18:34 O: -- Qt5Core: 5.11.3
00:18:34 O: -- Qt5Network: 5.11.3
00:18:34 O: -- Qt5Xml: 5.11.3
00:18:34 O: -- Qt5XmlPatterns: 5.11.3
00:18:34 O: -- Qt5Widgets: 5.11.3
00:18:34 O: -- Qt5PrintSupport: 5.11.3
00:18:34 O: -- Qt5OpenGL: 5.11.3
00:18:34 O: -- Qt5Svg: 5.11.3
00:18:34 O: -- Qt5UiTools: 5.11.3
00:18:34 O: -- Qt5Concurrent: 5.11.3
00:18:34 O: -- Qt5WebKitWidgets: 5.212.0
00:18:34 O: -- Shiboken2: 5.11.2 [/usr/lib/x86_64-linux-gnu/cmake/Shiboken2-5.11.2] [/usr/include/shiboken2]
00:18:34 O: -- PySide2: 5.11.2 [/usr/include/PySide2]
00:18:34 O: -- PySide2Tools: [/usr/bin/pyside2-uic] [/usr/bin/pyside2-rcc]
00:18:34 O: -- Freetype: 2.9.1
00:18:34 O: -- OpenGLU: /usr/lib/x86_64-linux-gnu/libGLU.so [/usr/lib/x86_64-linux-gnu/libGLU.so][/usr/include]
00:18:34 O: -- Coin3D: [/usr/lib/x86_64-linux-gnu/libCoin.so] [/usr/include]
00:18:34 O: -- SPNAV: [/usr/lib/libspnav.so] [/usr/include]
00:18:34 O: -- Matplotlib: 3.0.2
00:18:34 O: -- Rift: not enabled (BUILD_VR)
00:18:34 O: -- Doxygen: not found
Code: Select all
-DFREECAD_BUILD_DEBIAN=ON
-DBUILD_QT5=ON
-DBUILD_FEM_NETGEN=ON
-DBUILD_FLAT_MESH=ON
-DFREECAD_USE_PYBIND11=ON
-DFREECAD_USE_PCL=ON
-DPYTHON_EXECUTABLE=/usr/bin/python3
-DCMAKE_BUILD_TYPE=RelWithDebInfo
-DCMAKE_CXX_FLAGS="-Wall -DHAVE_SWIG=1 -fpermissive -g -O2 -fdebug-prefix-map=/build/freecad-daily-0.19+git201906240013~daily=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2" -DCMAKE_C_FLAGS="-Wall -fpermissive -g -O2 -fdebug-prefix-map=/build/freecad-daily-0.19+git201906240013~daily=. -fstack-protector-strong -Wformat -Werror=format-security -Wdate-time -D_FORTIFY_SOURCE=2"
-DCMAKE_SHARED_LINKER_FLAGS="-Wl,-z,relro -Wl,-z,now"
-DLIB_SUFFIX=""
-DCMAKE_INSTALL_PREFIX="/usr/lib/freecad-daily"
-DCMAKE_INSTALL_DATADIR="/usr/share/freecad-daily"
-DCMAKE_INSTALL_LIBDIR="/usr/lib/freecad-daily/lib"
-DCMAKE_INSTALL_DOCDIR="/usr/share/doc/freecad-daily-doc