The first error I see is with DNF:

Code: Select all

```
Problem: cannot install the best candidate for the job
- nothing provides python-pivy needed by freecad-1:0.19_pre-17320.x86_64
```

When I try to run it I receive this error:

Code: Select all

```
FreeCAD 0.19, Libs: 0.19R17320 (Git)
© Juergen Riegel, Werner Mayer, Yorik van Havre 2001-2019
##### #### ### ####
# # # # # #
# ## #### #### # # # # #
#### # # # # # # # ##### # #
# # #### #### # # # # #
# # # # # # # # # ## ## ##
# # #### #### ### # # #### ## ## ##
Error in InitApplications type '_io._IOBase' participates in gc and is a base type but has inappropriate
tp_free slot
--------------------------------------------------------------------------------
Traceback (most recent call last):
File "<string>", line 241, in <module>
File "<string>", line 54, in InitApplications
File "/usr/lib64/python2.7/io.py", line 51, in <module>
import _io
TypeError: type '_io._IOBase' participates in gc and is a base type but has inappropriate tp_free slot
--------------------------------------------------------------------------------
Program received signal SIGSEGV, Segmentation fault.
#0 /lib64/libc.so.6(+0x37f00) [0x7f9548fc3f00]
#1 /lib64/libpython2.7.so.1.0(PyObject_GetAttrString+0x16) [0x7f954a356296]
0000002 /lib64/libpython2.7.so.1.0(PyObject_HasAttrString+0xd) [0x7f954a35623d]
0000003 /lib64/libpython2.7.so.1.0(PyImport_ImportModuleLevel+0x262) [0x7f954a3af592]
0000004 /lib64/libpython2.7.so.1.0(+0x11a5dc) [0x7f954a3965dc]
0000005 /lib64/libpython2.7.so.1.0(PyObject_Call+0x47) [0x7f954a317197]
0000006 /lib64/libpython2.7.so.1.0(PyEval_CallObjectWithKeywords+0x4c) [0x7f954a402b5c]
0000007 /lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x2961) [0x7f954a405a21]
0000008 /lib64/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x7f8) [0x7f954a40c938]
0000009 /lib64/libpython2.7.so.1.0(PyEval_EvalCode+0x1d) [0x7f954a40cafd]
0000010 /lib64/libpython2.7.so.1.0(PyImport_ExecCodeModuleEx+0xc1) [0x7f954a3b17b1]
0000011 /lib64/libpython2.7.so.1.0(+0x13523e) [0x7f954a3b123e]
0000012 /lib64/libpython2.7.so.1.0(PyImport_ImportModuleLevel+0x7e1) [0x7f954a3afb11]
0000013 /lib64/libpython2.7.so.1.0(+0x11a5dc) [0x7f954a3965dc]
0000014 /lib64/libpython2.7.so.1.0(PyObject_Call+0x47) [0x7f954a317197]
0000015 /lib64/libpython2.7.so.1.0(PyEval_CallObjectWithKeywords+0x4c) [0x7f954a402b5c]
0000016 /lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x2961) [0x7f954a405a21]
0000017 /lib64/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x7f8) [0x7f954a40c938]
0000018 /lib64/libpython2.7.so.1.0(PyEval_EvalFrameEx+0x6b3e) [0x7f954a409bfe]
0000019 /lib64/libpython2.7.so.1.0(PyEval_EvalCodeEx+0x7f8) [0x7f954a40c938]
0000020 /lib64/libpython2.7.so.1.0(PyEval_EvalCode+0x1d) [0x7f954a40cafd]
0000021 /lib64/libpython2.7.so.1.0(PyRun_StringFlags+0x78) [0x7f954a3ba3f8]
0000022 0x7f954a606fda in Base::InterpreterSingleton::runString[abi:cxx11](char const*) from /usr/lib64/freecad/lib/libFreeCADBase.so+0x6a
0000023 0x7f954af145b3 in Gui::Application::runInitGuiScript() from /usr/lib64/freecad/lib/libFreeCADGui.so+0x43
0000024 0x7f954af1d039 in Gui::Application::runApplication() from /usr/lib64/freecad/lib/libFreeCADGui.so+0x13f9
0000025 FreeCAD(main+0x716) [0x55c56aad9046]
0000026 /lib64/libc.so.6(__libc_start_main+0xf3) [0x7f9548faff33]
0000027 FreeCAD(_start+0x2e) [0x55c56aad93be]
```