Hello everyone,
I run freeCAD 0.18 as AppImage and as installation from Ubuntu 18.04 "gui - software - centre".
I got the : 046d:c626 Logitech, Inc. 3Dconnexion Space Navigator 3D Mouse
I've follow the installation - manual :
https://www.freecadweb.org/wiki/3Dconne ... devices/de
I allways used the latest software - version :
spnavcfg-0.3
libspnav-0.2.3
spacenavd-0.6
I try without success to make the "cube example" , I got the message : cube.c:15:10: fatal error: GL/glu.h: Datei oder Verzeichnis nicht gefunden
The simple - example simple_af_unix works, I get messages like
...
got motion event: t(12, -25, -16) r(14, 8, 79)
got motion event: t(12, -25, -16) r(13, 8, 45)
...
in the terminal.
First after the following action
sudo xhost +
sudo /etc/init.d/spacenavd restart
I also get the same messages in the terminal from the simple_x11 - example.
I was making and installing the spacenavd-0.6 - files without any error - messages.
But after installation the 3d-mouse doesn't appear in the freeCAD - settings.
So I followed the following hints also without success:
sudo cp ~/.Xauthority /root/
sudo spnavd_ctl x11 start
sudo systemctl restart spacenavd
The output from command now is : tail -n100 -f /var/log/spnavd.log looks like:
Spacenav daemon 0.6
failed to open config file /etc/spnavrc: No such file or directory. using defaults.
Device detection, parsing /proc/bus/input/devices
found usb device [46d:c626]: "3Dconnexion SpaceNavigator" (/dev/input/event2)
adding device.
device name: 3Dconnexion SpaceNavigator
Number of axes: 6
using device: /dev/input/event2
trying to open X11 display ":0"
XAUTHORITY=/run/user/1000/gdm/Xauthority
adding dev event for device: /dev/input/event2
handle_hotplug called
Device detection, parsing /proc/bus/input/devices
found usb device [46d:c626]: "3Dconnexion SpaceNavigator" (/dev/input/event2)
already using device: 3Dconnexion SpaceNavigator (/dev/input/event2)
failed to find any supported devices
handle_hotplug called
Device detection, parsing /proc/bus/input/devices
found usb device [46d:c626]: "3Dconnexion SpaceNavigator" (/dev/input/event2)
already using device: 3Dconnexion SpaceNavigator (/dev/input/event2)
failed to find any supported devices
Till now after all this actions I don't get the freeCAD - programm to recognise the 3d-connexion - mouse.
Please give mi a hint how to connect the mouse successful to freeCAD.
How can I probe the curent installation?
Do you need any further infos to evaluate the curent system?
big THX in advance
