如果圆角时如何不自动选择相切边?
Moderator: paullee
Forum rules
论坛规矩 / 論壇規矩 , 有用的资讯 / 有用的資訊
论坛规矩 / 論壇規矩 , 有用的资讯 / 有用的資訊
-
- Posts: 3
- Joined: Mon Jan 17, 2022 6:02 am
如果圆角时如何不自动选择相切边?
在FreeCAD中只选择一条边进行圆角时,它会自动选择和其相切的边进行圆角,我要如何才能只对着一条边圆角,而不自动选择上其他边呢?
Re: 如果圆角时如何不自动选择相切边?
歡迎
可做一個草圖解釋一下你的意思嗎? 在那一個workbend 上做?
可做一個草圖解釋一下你的意思嗎? 在那一個workbend 上做?
- Shalmeneser
- Veteran
- Posts: 9580
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: 如果圆角时如何不自动选择相切边?
- Attachments
-
- 16e arrondissement_SHALM.FCStd
- (37.37 KiB) Downloaded 127 times
-
- Capture du 2022-01-17 23-38-53.png (35.8 KiB) Viewed 5568 times
- Shalmeneser
- Veteran
- Posts: 9580
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: 如果圆角时如何不自动选择相切边?
- Attachments
-
- Capture du 2022-01-17 23-44-23.png (21.54 KiB) Viewed 5566 times
-
- 15e arrondissement_SHALM.FCStd
- (24.33 KiB) Downloaded 152 times
-
- Posts: 3
- Joined: Mon Jan 17, 2022 6:02 am
Re: 如何圆角时不自动选择相切边?
比如我有这样一个实体:
之后我只想对左侧一条边(黄色高亮)进行圆角:
但是结果却自动将和其相切的其他两条边都选上了:
我要怎么做才能只对那一条边进行圆角?- Shalmeneser
- Veteran
- Posts: 9580
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: 如果圆角时如何不自动选择相切边?
Not with fillet !
Need to to it yourself.
But why do you need this ?
Need to to it yourself.
But why do you need this ?
- Attachments
-
- Capture du 2022-01-19 19-59-54.png (24.8 KiB) Viewed 5365 times
-
- Fillet .FCStd
- (25.03 KiB) Downloaded 136 times
-
- Posts: 3
- Joined: Mon Jan 17, 2022 6:02 am
Re: 如果圆角时如何不自动选择相切边?
其实我想要得到这样的效果:
因为我使用其他软件都有取消选择相切边这样的功能- Shalmeneser
- Veteran
- Posts: 9580
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: 如果圆角时如何不自动选择相切边?
Nothing like that in PartDesign.
Re: 如果圆角时如何不自动选择相切边?
感謝你提供意見,可以用中文嗎?
(Are you using translation app? Or you can read and write/speak Chinese ?)
- Shalmeneser
- Veteran
- Posts: 9580
- Joined: Wed Dec 23, 2020 12:04 am
- Location: Fr
Re: 如果圆角时如何不自动选择相切边?
Google translation