Spline in Part Design with Spreadsheet

Have some feature requests, feedback, cool stuff to share, or want to know where FreeCAD is going? This is the place.
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
MMSN
Posts: 37
Joined: Wed May 28, 2014 7:36 pm

Spline in Part Design with Spreadsheet

Postby MMSN » Wed Jun 08, 2016 2:35 am

Hi all,
I am so impress for the last 0.16 version of Freecad. Congratulations for this big improvement.
Is it feasible to edit splines curves in part Design with Spreadsheet.?
If yes, how to do this,
If No, Is it on the plan of future improvement?
I am attaching a brief sketch that I did for show my question.
Spline in Part Design with Spreadsheet-1.JPG
Spline in Part Design with Spreadsheet-1.JPG (40.8 KiB) Viewed 1008 times
MMSN
Posts: 37
Joined: Wed May 28, 2014 7:36 pm

Re: Spline in Part Design with Spreadsheet

Postby MMSN » Thu Jun 09, 2016 3:01 am

Hi All,
I have made an example using points, arc point and rim point plus coincident and tangent constraints. It is more slow method but run. :D
Example with Arc and tangent constrains.JPG
Example with Arc and tangent constrains.JPG (162.68 KiB) Viewed 959 times
OCC version: 6.8.0.oce-0.17
Example with Arc and tangent constrains-4.JPG
Example with Arc and tangent constrains-4.JPG (71.55 KiB) Viewed 953 times
OS: Windows Vista
Word size of OS: 32-bit
Word size of FreeCAD: 32-bit
Version: 0.16.6704 (Git)
Build type: Release
Branch: releases/FreeCAD-0-16
Python version: 2.7.8
Qt version: 4.8.6
Coin version: 4.0.0a