Files don't open after today's software update!
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
Re: Files don't open after today's software update!
*.stl files open nicely.
*.fcsd and *.step do not, if it is of any help.
/C
*.fcsd and *.step do not, if it is of any help.
/C
electrical engineer
Ubuntu or Mint
Mendel 3d-printer/OctoPrint
LinuxCNC
Optimum BF20L mill
Ubuntu or Mint
Mendel 3d-printer/OctoPrint
LinuxCNC
Optimum BF20L mill
Re: Files don't open after today's software update!
I can confirm, that step files do not open.
FreeCAD-files with FCSTD do work.
Ulrich
OS: Debian GNU/Linux 8.7 (jessie)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.10065 (Git) (extra commit for Debian VTK-issue)
Build type: Release
Branch: Rueck6
Hash: 1cec205531828b44156dff7b655d72ee10119529
Python version: 2.7.9
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 7.1.0
FreeCAD-files with FCSTD do work.
Ulrich
OS: Debian GNU/Linux 8.7 (jessie)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.10065 (Git) (extra commit for Debian VTK-issue)
Build type: Release
Branch: Rueck6
Hash: 1cec205531828b44156dff7b655d72ee10119529
Python version: 2.7.9
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 7.1.0
Re: Files don't open after today's software update!
I wonder if this has anything to do with locals settings. Since Ulrich uses German with a comma as the decimal separator, Bejant and Norm I think both use a decimal point separator locals.
Re: Files don't open after today's software update!
This might be caused by some recent locale specific changes. Depending on locale settings floating point numbers are saved with a comma as decimal separator in the usr.cfg.cahlfors wrote:Files no longer open on my daily build either...
All I get is 100% CPU.
Cheers, /Christoffer
With the required fix these numbers are probably saved with a point as decimal separator now. The problem is that the new version cannot interpret the comma separated numbers any more and set them all to 0.0. Especially for the tessellation deviation value this leads to problems because the default of 0.05 is set to 0.0 and thus the meshing takes forever.
To fix this issue start FreeCAD and go to the settings and reset to the default value.Alternatively, just delete the user.cfg file.
Re: Files don't open after today's software update!
Unable to find any "settings" (do you mean edit ->preferences - if so, where is "default"?), so deleted ~/.FreeCAD/user.cfg as suggested.
Still 100% CPU.
I am using Swedish locale, but unable to find those settings in FreeCAD. Merely changing language does not seem to change the decimal character.
/Chris
Still 100% CPU.
I am using Swedish locale, but unable to find those settings in FreeCAD. Merely changing language does not seem to change the decimal character.
/Chris
electrical engineer
Ubuntu or Mint
Mendel 3d-printer/OctoPrint
LinuxCNC
Optimum BF20L mill
Ubuntu or Mint
Mendel 3d-printer/OctoPrint
LinuxCNC
Optimum BF20L mill
Re: Files don't open after today's software update!
Hi bejant,
thanks for your effort. I tried your file, but the problem remains unchanged. 0.16 opens it shortly - I can see my drawing for about 0.5 seconds - and then closes the file with an error message. As for 0.17 I get a freeze.
The error message in 0.16 reads literally:
"Traceback (most recent call last): File "", line 1, in : Property not found"
Best regards
Jonathan
thanks for your effort. I tried your file, but the problem remains unchanged. 0.16 opens it shortly - I can see my drawing for about 0.5 seconds - and then closes the file with an error message. As for 0.17 I get a freeze.
The error message in 0.16 reads literally:
"Traceback (most recent call last): File "", line 1, in : Property not found"
Best regards
Jonathan
Re: Files don't open after today's software update!
I did delete user.cfg and system.cfg. I can now again open step files.
Ulrich
OS: Debian GNU/Linux 8.7 (jessie)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.10067 (Git) (extra commit for Debian VTK issue)
Build type: Release
Branch: Rueck6
Hash: d59bc42082d40dddb27beb9eb141be10ed4401fd
Python version: 2.7.9
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 7.1.0
Ulrich
OS: Debian GNU/Linux 8.7 (jessie)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.10067 (Git) (extra commit for Debian VTK issue)
Build type: Release
Branch: Rueck6
Hash: d59bc42082d40dddb27beb9eb141be10ed4401fd
Python version: 2.7.9
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 7.1.0
Re: Files don't open after today's software update!
Hello,
I deleted both system.cfd and user.cfd (located in ~/.FreeCAD), restarted 0.16 and tried again - no difference, problem remains.
Regards
Jon
I deleted both system.cfd and user.cfd (located in ~/.FreeCAD), restarted 0.16 and tried again - no difference, problem remains.
Regards
Jon
Re: Files don't open after today's software update!
The file schacht5.fcstd is now a FreeCAD Version 0.17R9822 file. It seems to have properties, not supported in FreeCAD 0.16. I am not an expert, what kind of properties did change, but I do expect, it will not open in 0.16 anymore.
There may be a chance by manually editing the xml-files included in the document, but others have to say, what changes are possible.
I tried another method and started both Versions of FreeCAD in parallel. It was possible to open Schacht5 in FreeCAD version 0.17. I was able to select all features in 0.17 and copy and paste them in 0.16. It gave some error messages, but at last I could save a document. You may test it.
By the way, you seems to work mostly with Draft in FreeCAD. Did you have a look at the Sketcher? This is a much more modern method to construct parts.
Ulrich
There may be a chance by manually editing the xml-files included in the document, but others have to say, what changes are possible.
I tried another method and started both Versions of FreeCAD in parallel. It was possible to open Schacht5 in FreeCAD version 0.17. I was able to select all features in 0.17 and copy and paste them in 0.16. It gave some error messages, but at last I could save a document. You may test it.
By the way, you seems to work mostly with Draft in FreeCAD. Did you have a look at the Sketcher? This is a much more modern method to construct parts.
Ulrich
- Attachments
-
- Schacht5_FC0.16.fcstd
- (510.96 KiB) Downloaded 36 times
Re: Files don't open after today's software update!
No, I use a comma just like in the German language.jmaustpc wrote:Bejant and Norm I think both use a decimal point separator locals.
This may be related: https://forum.freecadweb.org/viewtopic. ... 37#p158895
I opened a bunch of files I created in 0.17 from last January and December. No problem doing so.