An example of Gordon Surface based upon OCC
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
Re: An example of Gordon Surface based upon OCC
For an experimental workbench, the support is better than for a commercial one ! Getting an answer in 2 minutes ! Wow ! Thanks for the tip, I will try following your advice ... Keep up the great work.
EDIT : it works great now, using BSplines made with Sketcher!
EDIT : it works great now, using BSplines made with Sketcher!
Re: An example of Gordon Surface based upon OCC
… repeatedly experimenting with the spline tools in CurvesWB
https://forum.freecadweb.org/viewtopic. ... 18#p269509
I don't fully understand it .
But modifying a simple straight line generated with the 2 spline tools,
in data tab you can form a 3D-spline and change its coordinates.
The combined projection /curves tool (in between the spline tools) working with sketcher splines,
is much better to understand and to control for us aero- and hydrodynamic body designers….
https://forum.freecadweb.org/viewtopic. ... 18#p269509
I don't fully understand it .
But modifying a simple straight line generated with the 2 spline tools,
in data tab you can form a 3D-spline and change its coordinates.
The combined projection /curves tool (in between the spline tools) working with sketcher splines,
is much better to understand and to control for us aero- and hydrodynamic body designers….
Re: An example of Gordon Surface based upon OCC
Body made of pipeshell and handle with a gordon surface.
From Catia made with Freecad.
From Catia made with Freecad.
- Attachments
-
- Capture.PNG (53.18 KiB) Viewed 1501 times
-
- carter.PNG (158.52 KiB) Viewed 1501 times
- microelly2
- Veteran
- Posts: 4688
- Joined: Tue Nov 12, 2013 4:06 pm
- Contact:
Re: An example of Gordon Surface based upon OCC
Gordon crash Freecad when making a gordon with the whole guides and make a inverted surface when I try to make 4 separated gordon.
- Attachments
-
- gordoncrash.FCStd
- (300.19 KiB) Downloaded 51 times
-
- Capture.PNG (30.21 KiB) Viewed 1448 times
Re: An example of Gordon Surface based upon OCC
there're no bug by slicing the bottom circle into 4 arcs.
- Attachments
-
- Capture.PNG (29.02 KiB) Viewed 1401 times
Re: An example of Gordon Surface based upon OCC
A plastic bottle using gordon surfaces ans pipeshell.
- Attachments
-
- Capture.png (92.62 KiB) Viewed 1348 times
Re: An example of Gordon Surface based upon OCC
Trying to make a hull, the gordon surface come with something more.
Do you have any idea about this issue? How to manage that?
Do you have any idea about this issue? How to manage that?
- Attachments
-
- GordonHull.FCStd
- (263.16 KiB) Downloaded 52 times
-
- Capture.PNG (54.35 KiB) Viewed 1294 times