Hi
I like to suggest a feature what is very helpfull for part design specially for plastic parts.
It is the possibility to show the wall thicknes of a meshed part from the surface to the oposite surface
The mesh color should be in the color of the thickness detected.
With this tool it will be easy to detect areas with bigger thicknes and so problems at the real produced part could be avoided.
I think also for people use a model for 3D Print they could detect small wall thicknes easy
At this link the calculation is explained
https://www.sciencedirect.com/science/a ... 001500038X
Greetings
Nanayaw
Mesh Wall Thicknes Analysis
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
Re: Mesh Wall Thicknes Analysis
Hi
I made a part for example and I made a Analysis with another programm here some Pictures
I made a part for example and I made a Analysis with another programm here some Pictures
- Attachments
-
- Test Block.stl
- (16.88 KiB) Downloaded 17 times
-
- 4.jpg (284.69 KiB) Viewed 459 times
-
- 3.jpg (57.76 KiB) Viewed 459 times
-
- 2.jpg (71.16 KiB) Viewed 459 times
-
- 1.jpg (81.15 KiB) Viewed 459 times