Combined counterbore+countersink

Have some feature requests, feedback, cool stuff to share, or want to know where FreeCAD is going? This is the place.
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
openBrain
Posts: 2183
Joined: Fri Nov 09, 2018 5:38 pm

Re: Combined counterbore+countersink

Postby openBrain » Tue Mar 05, 2019 11:15 pm

Hope it can clarify a bit above post :
counterbore_sink.png
counterbore_sink.png (53.97 KiB) Viewed 312 times
chrisb
Posts: 19042
Joined: Tue Mar 17, 2015 9:14 am

Re: Combined counterbore+countersink

Postby chrisb » Wed Mar 06, 2019 12:22 am

That makes things very clear.
chrisb
Posts: 19042
Joined: Tue Mar 17, 2015 9:14 am

Re: Combined counterbore+countersink

Postby chrisb » Fri Mar 08, 2019 10:33 pm

Feature request: issue #3893.
eivindkvedalen
Posts: 598
Joined: Tue Jan 29, 2013 10:35 pm

Re: Combined counterbore+countersink

Postby eivindkvedalen » Thu Apr 11, 2019 6:18 pm

chrisb wrote:
Fri Mar 08, 2019 10:33 pm
Feature request: issue #3893.
Branch for testing: https://github.com/eivindkv/FreeCAD/tree/Fix_issue_3893

Eivind
reox
Posts: 664
Joined: Sat Aug 13, 2016 10:06 am
Contact:

Re: Combined counterbore+countersink

Postby reox » Thu Apr 11, 2019 6:43 pm

Nice! +1 from me!

Would be also nice to have more thread options like setting the depth of the thread.
Also a nice feature would be to define the depth of the hole with or without the drill point. As in technical drawing usually the useable hole is measured and not the hole with the depth until the drill tip point.
chrisb
Posts: 19042
Joined: Tue Mar 17, 2015 9:14 am

Re: Combined counterbore+countersink

Postby chrisb » Fri Apr 12, 2019 3:44 pm

I haven't set up a testing environment, so it would be great if someone else can test this. Would like to see this in master.
eivindkvedalen
Posts: 598
Joined: Tue Jan 29, 2013 10:35 pm

Re: Combined counterbore+countersink

Postby eivindkvedalen » Fri Apr 12, 2019 4:04 pm

reox wrote:
Thu Apr 11, 2019 6:43 pm
Nice! +1 from me!

Would be also nice to have more thread options like setting the depth of the thread.
Also a nice feature would be to define the depth of the hole with or without the drill point. As in technical drawing usually the useable hole is measured and not the hole with the depth until the drill tip point.
Please register these requests in the tracker, so we don't forget them.

Eivind