Holing along an edge should be useful. Like a subtractive pipe, it should be easy to rule the depth and angle of the hole.
The option could be located after "depth" by ticking and indicate the edge.
Request Hole feature: hole along edge
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
Request Hole feature: hole along edge
- Attachments
-
- Percages.FCStd
- (79.69 KiB) Downloaded 28 times
-
- Capture.PNG (40.98 KiB) Viewed 1646 times
Re: Request Hole feature: hole along edge
We have talked about something like this: having some standard sections for sweeps like circle, square, triangle, but this might be something for an addon macro
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Request Hole feature: hole along edge
hi
as this Macro_Connect_And_Sweep (select two points and Create) (only straight line no curve for the moment)
in your case, after create the object you must just substract
(upgraded for 0.18 recently)
mario
as this Macro_Connect_And_Sweep (select two points and Create) (only straight line no curve for the moment)
in your case, after create the object you must just substract
(upgraded for 0.18 recently)
mario
Maybe you need a special feature, go into Macros_recipes and Code_snippets, Topological_data_scripting.
My macros on Gist.github here complete macros Wiki and forum.
My macros on Gist.github here complete macros Wiki and forum.
Re: Request Hole feature: hole along edge
I don't understand the point of this request (which, as I say all the time, should not be posted in a development forum but in Open discussion, as clearly stated by its description).
A Hole requires a sketch; since you have to create a sketch anyway, you can create it normal to the edge.
A Hole requires a sketch; since you have to create a sketch anyway, you can create it normal to the edge.
- Attachments
-
- FC_forum_Open_discussion_01.png (14.07 KiB) Viewed 1419 times
Re: Request Hole feature: hole along edge
It happens all the time. Also help request (even in the help topics place) about materials, FEM or BIM are moved to that developement sections. So it is also partly how (at least some of the) moderators do their task...
Re: Request Hole feature: hole along edge
Yes, but hole feature can't manage depth hole and depth counterbore/countersink from the edge of the part. It's starting from the sketch.
- Attachments
-
- Capture.PNG (23.62 KiB) Viewed 1349 times
-
- Posts: 602
- Joined: Tue Jan 29, 2013 10:35 pm
Re: Request Hole feature: hole along edge
I've added top clearance in the branch mentioned here: issue #3893
Eivind
Re: Request Hole feature: hole along edge
Thank you!
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.