Microelly2 was the principle dev for this. He left the FC community recently. He definitely showed us that it's possible but his code wasn't so conducive for collaboration. Recently Marjan (?) Tried to port his code and wasn't so successful. It's a shame.
node editor - pyflow
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
Re: node editor - pyflow
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
-
Pauvres_honteux
- Posts: 728
- Joined: Sun Feb 16, 2014 12:05 am
- Location: Far side of the moon
Re: node editor - pyflow
There's a thread collecting/tracking anything about NURBS here:
A dedicated NURBS workbench
A dedicated NURBS workbench
Re: node editor - pyflow
Good news: PyFlow has been leveraged by a new project called FreeCAD Animation Workbench
https://github.com/QuentinTournier40/AnimationFreeCAD
There is some discussion to fork PyFlow (since it's unmaintained by it's upstream): https://github.com/QuentinTournier40/An ... D/issues/4
https://github.com/QuentinTournier40/AnimationFreeCAD
There is some discussion to fork PyFlow (since it's unmaintained by it's upstream): https://github.com/QuentinTournier40/An ... D/issues/4
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Re: node editor - pyflow
Hello,
We will see if all our dependencies are available through pip.
How can we add our module to your git ?
When should you release the next update ?
@SHaiZen25
We will see if all our dependencies are available through pip.
How can we add our module to your git ?
When should you release the next update ?
@SHaiZen25
Re: node editor - pyflow
Relevant links:
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Re: node editor - pyflow
It would be cool if stuff like this is possible in FC...
Last edited by Jee-Bee on Thu Jun 23, 2022 10:05 am, edited 1 time in total.
Re: node editor - pyflow
I see only the message "Sorry, this URL is not supported".
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: node editor - pyflow
Sorry i was to fanatic i add the video things twice
-
jtm2020hyo
- Posts: 594
- Joined: Wed Aug 12, 2020 1:24 am
Re: node editor - pyflow
until I remember generative design is already possible in FC
Re: node editor - pyflow
Hello FC Community
I recently discovered this matter with Pyflow and wanted to try it by myself. I downloaded everything
from Microelly2`s Github page and wanted to get started. But I came across some problems.
1. The workbench pyflow does not appear in the list although it was stored
2. I cannot import the blinker signal package, although installed.
If I want to install blinker again, I get a message that it`s already installed. The path variable in Windows is also set.
Any tips?
Thanks + Regards
Christian
OS: Windows 10 Version 2009
Word size of FreeCAD: 64-bit
Version: 0.20.1.29410 (Git)
Build type: Release
Branch: releases/FreeCAD-0-20
Hash: f5d13554ecc7a456fb6e970568ae5c74ba727563
Python 3.8.10, Qt 5.15.2, Coin 4.0.1, Vtk 8.2.0, OCC 7.6.3
Locale: German/Germany (de_DE)
Installed mods:
* 3DfindIT 1.2.0
* Assembly4 0.12.4
* Defeaturing 1.2.0
* dodo 1.0.0
* fasteners 0.4.23
* Manipulator 1.4.9
* sheetmetal 0.2.59
I recently discovered this matter with Pyflow and wanted to try it by myself. I downloaded everything
from Microelly2`s Github page and wanted to get started. But I came across some problems.
1. The workbench pyflow does not appear in the list although it was stored
2. I cannot import the blinker signal package, although installed.
If I want to install blinker again, I get a message that it`s already installed. The path variable in Windows is also set.
Any tips?
Thanks + Regards
Christian
OS: Windows 10 Version 2009
Word size of FreeCAD: 64-bit
Version: 0.20.1.29410 (Git)
Build type: Release
Branch: releases/FreeCAD-0-20
Hash: f5d13554ecc7a456fb6e970568ae5c74ba727563
Python 3.8.10, Qt 5.15.2, Coin 4.0.1, Vtk 8.2.0, OCC 7.6.3
Locale: German/Germany (de_DE)
Installed mods:
* 3DfindIT 1.2.0
* Assembly4 0.12.4
* Defeaturing 1.2.0
* dodo 1.0.0
* fasteners 0.4.23
* Manipulator 1.4.9
* sheetmetal 0.2.59