Feature Request: Substractive Revolution.

Have some feature requests, feedback, cool stuff to share, or want to know where FreeCAD is going? This is the place.
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
chrisb
Posts: 19749
Joined: Tue Mar 17, 2015 9:14 am

Re: Feature Request: Substractive Revolution.

Postby chrisb » Sun Aug 25, 2019 4:17 pm

jruiz wrote:
Sun Aug 25, 2019 3:32 pm
  1. Load grooveF.FCStd
  2. Select Sketch001
  3. On Tasks tab, click on Groove. (you'll see just a a circle, even though Vertical sketch axis is selected by default)
  4. ...
After that step I see already the same image I posted above. So please (again) test with a current 0.19, and others having Ubuntu 18.04.3 LTS please confirm how it works there.

Besides that, is there any benefit of having two identical pads based on the same sketch?
jruiz
Posts: 96
Joined: Tue Oct 28, 2014 1:07 pm

Re: Feature Request: Substractive Revolution.

Postby jruiz » Sun Aug 25, 2019 6:10 pm

chrisb wrote:
Sun Aug 25, 2019 4:17 pm
jruiz wrote:
Sun Aug 25, 2019 3:32 pm
  1. Load grooveF.FCStd
  2. Select Sketch001
  3. On Tasks tab, click on Groove. (you'll see just a a circle, even though Vertical sketch axis is selected by default)
  4. ...
After that step I see already the same image I posted above. So please (again) test with a current 0.19, and others having Ubuntu 18.04.3 LTS please confirm how it works there.

Besides that, is there any benefit of having two identical pads based on the same sketch?
Just downloaded last version of Freecad 0.19, and the "microbug" is fixed there.
(On an a previous version of FC 0.19 the commented behavior is observed)

BTW, the two identical pads were a mistake.



OS: Ubuntu 18.04.3 LTS (ubuntu:GNOME/ubuntu)
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.19.17798 (Git) AppImage
Build type: Release
Branch: master
Hash: 7e60631239109c632a8f6cca83f6e7e5502e43a1
Python version: 3.7.3
Qt version: 5.9.7
Coin version: 4.0.0a
OCC version: 7.3.0