[Issue #6189] Surface to surface tangency
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
- Pauvres_honteux
- Posts: 728
- Joined: Sun Feb 16, 2014 12:05 am
- Location: Far side of the moon
[Issue #6189] Surface to surface tangency
Hi, anyone working on surface to surface tangency with the intent of up-streaming it to master?
The surfaces shall have a common curve ruling them both.
The surfaces shall have a common curve ruling them both.
Last edited by Kunda1 on Mon Jun 27, 2022 9:12 pm, edited 2 times in total.
Reason: Added GH ticket number to thread title
Reason: Added GH ticket number to thread title
-
- Veteran
- Posts: 7791
- Joined: Tue Jan 07, 2014 11:10 am
- Contact:
Re: Surface to surface tangency
https://www.bitchute.com/video/m9v0koWe7f14/Pauvres_honteux wrote: ↑Wed May 27, 2020 1:46 pm Hi, anyone working on surface to surface tangency with the intent of up-streaming it to master?
The surfaces shall have a common curve ruling them both.
- Pauvres_honteux
- Posts: 728
- Joined: Sun Feb 16, 2014 12:05 am
- Location: Far side of the moon
Re: Surface to surface tangency
Hi, sorry to say but the problem still persist: there's still no way to define a start and end surface tangency for a multi section surface, where everything stays connected. And I have yet to see any solution to it, with the exception of Thomas
but he doesn't seam to be interested in upstreaming it to master...
Please see
for a very simple real life turbo inlet tube.
Perhaps a chat with
would give some clues?realthunder wrote:
- Pauvres_honteux
- Posts: 728
- Joined: Sun Feb 16, 2014 12:05 am
- Location: Far side of the moon
Re: Surface to surface tangency
Hi gAdlike, you seem to be programming for the OCE-project?gAdlike wrote:
If so, maybe you can tell us if surface to surface tangency is possible at all with OCE/OCCT?
If it is, can you give some pointers on how to achieve it?
Last edited by Pauvres_honteux on Sat Jun 06, 2020 4:47 pm, edited 1 time in total.
- Pauvres_honteux
- Posts: 728
- Joined: Sun Feb 16, 2014 12:05 am
- Location: Far side of the moon
Re: Surface to surface tangency
Hi Kunda1, it seams as gAdlike isn't around any more. Do you have suggestions on other people programming for OCE/OCCT ?Kunda1 wrote:
Last edited by Pauvres_honteux on Sat Jun 06, 2020 4:48 pm, edited 1 time in total.
Re: Surface to surface tangency
Not sure, maybe yorik or kkremitzki might know ?Pauvres_honteux wrote: ↑Sun May 31, 2020 8:31 am Hi Kunda1, it seams as gAdlike isn't around any more. Do you have suggestions on other people programming for OCC/OCCT ?
Alone you go faster. Together we go farther
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
Please mark thread [Solved]
Want to contribute back to FC? Checkout:
'good first issues' | Open TODOs and FIXMEs | How to Help FreeCAD | How to report Bugs
- Pauvres_honteux
- Posts: 728
- Joined: Sun Feb 16, 2014 12:05 am
- Location: Far side of the moon
Re: Surface to surface tangency
yorik wrote:
kkremitzki wrote:
.wmayer wrote:
Hi guys! You wouldn't by any chance know anyone working for/with OCC/OCCT in this fora?
- Pauvres_honteux
- Posts: 728
- Joined: Sun Feb 16, 2014 12:05 am
- Location: Far side of the moon
Re: Surface to surface tangency
Anyone?
-
- Veteran
- Posts: 7791
- Joined: Tue Jan 07, 2014 11:10 am
- Contact:
- Pauvres_honteux
- Posts: 728
- Joined: Sun Feb 16, 2014 12:05 am
- Location: Far side of the moon
Re: Surface to surface tangency
So what you, freecad-heini-1, is suggesting is there is one, and one only, who works on surface to surface tangency, i.e. Thomas "microelly2" ?