Call for screenshots
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
Re: 1950s Lotus racing wheel
Hello,
this would be a very instesting "how-to"-film on YT on this very beautiful wheel. I think they were the forerunners to the rose petal wheels that later were used on the Cooper racing cars and the even later Minilite wheels of which I have a set in 5.5x10 size for Minis in magnesium but not recommended for racing any more as magnesium is prone to aging quite quickly.
Kind regards,
Helmut
this would be a very instesting "how-to"-film on YT on this very beautiful wheel. I think they were the forerunners to the rose petal wheels that later were used on the Cooper racing cars and the even later Minilite wheels of which I have a set in 5.5x10 size for Minis in magnesium but not recommended for racing any more as magnesium is prone to aging quite quickly.
Kind regards,
Helmut
Re: Call for screenshots
hello Yorik,
Here is the screenshot of the project of a clock to achieve in cardboard, simple to process with a bit of work and the result is encouraging for a beginner like me to continue learning FreeCAD, of course, if the project is worthwhile.
Greetings,
Lou Papet
Here is the screenshot of the project of a clock to achieve in cardboard, simple to process with a bit of work and the result is encouraging for a beginner like me to continue learning FreeCAD, of course, if the project is worthwhile.
Greetings,
Lou Papet
Pourquoi fait simple quand on peut faire encore plus simple !...
Le plus simple est de ne pas faire.... seulement si c'est possible !...
Le plus simple est de ne pas faire.... seulement si c'est possible !...
Re: Call for screenshots
Wow, very beautiful work!
Re: Call for screenshots
- Attachments
-
- printbot-beetle-bq.png (470.37 KiB) Viewed 22620 times
Re: Call for screenshots
- Attachments
-
- hephestos-2.png (303.26 KiB) Viewed 22616 times
Re: Call for screenshots
Prusa i3 hephestos:
https://github.com/bq/prusa-i3-hephestos
https://github.com/bq/prusa-i3-hephestos
- Attachments
-
- hephestos-1.png (463.75 KiB) Viewed 22616 times
-
- Posts: 1
- Joined: Wed Mar 25, 2015 11:09 am
Re: Call for screenshots
Here is a PDIP-40 chip, that I made for fun only.
Bye
Michele Alessandrini
Bye
Michele Alessandrini
- Attachments
-
- pdip-40.fcstd
- (157.04 KiB) Downloaded 200 times
Re: Call for screenshots
Hi Michele!
it would be great if you could upload it to the Freecad library:
https://github.com/yorikvanhavre/FreeCAD-library
There are a lot of electronic components there
Good work! Thanks a lot!
it would be great if you could upload it to the Freecad library:
https://github.com/yorikvanhavre/FreeCAD-library
There are a lot of electronic components there
Good work! Thanks a lot!
- DeepSOIC
- Veteran
- Posts: 7896
- Joined: Fri Aug 29, 2014 12:45 am
- Location: used to be Saint-Petersburg, Russia
Re: Call for screenshots
Not very complex, and looks cool IMO
Feel free to use for whatever purpose.
Feel free to use for whatever purpose.
Last edited by DeepSOIC on Mon Mar 30, 2015 10:20 pm, edited 1 time in total.
Reason: Added FCStd file
Reason: Added FCStd file
Re: Call for screenshots
"A view of Astropolis, the capital city of planet Mechatron"