Call for screenshots

Have some feature requests, feedback, cool stuff to share, or want to know where FreeCAD is going? This is the place.
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
arnn
Posts: 22
Joined: Fri Feb 21, 2020 7:39 am

Re: Call for screenshots

Postby arnn » Sat Jul 18, 2020 3:33 am

That is really beautiful. how did you get/do this interface.

OficineRobotica wrote: Thu Jul 16, 2020 6:13 pm I was doing some testing on a tower pc with a ultra wide monitor and thought that Freecad looks just beautiful.
Using LinkStage3 branch with overlay interface and shadows activated in the view port.hydroBrake.jpeg
wieszak17
Posts: 77
Joined: Fri Jan 10, 2014 7:59 pm

Re: Call for screenshots

Postby wieszak17 » Mon Jul 20, 2020 12:05 pm

Yet another railway part - this time friend aked me to model some part of steam loco - i don't know proper english name for it - it is user end part of device used to set power of engine by regulating how much steam is used per cycle and also to set direction of movement.
nawrot.png
nawrot.png (181.62 KiB) Viewed 6692 times
FC19 on linux, only problems were fillets (most are omitted...)causing crash...
If everything will be okay, than this will be printed.
User avatar
PrzemoF
Posts: 3186
Joined: Fri Jul 25, 2014 4:52 pm
Contact:

Re: Call for screenshots

Postby PrzemoF » Mon Jul 20, 2020 12:21 pm

Beautiful part! I think it's called "screw reverser"
https://en.wikipedia.org/wiki/Reversing_gear
User avatar
Stemfie3D
Posts: 11
Joined: Thu Oct 15, 2020 8:26 pm
Location: Sweden
Contact:

Re: Call for screenshots

Postby Stemfie3D » Tue Nov 10, 2020 12:05 am

Image
Grub
Posts: 115
Joined: Sun Nov 15, 2020 7:28 pm

Re: Call for screenshots

Postby Grub » Thu Dec 24, 2020 1:40 pm

At first I only wanted to model the engine and sprockets and then finally I continued, here is my vintage electric scooter, it's not finished, there are still some small details left :
Capture d’écran (27).png
Capture d’écran (27).png (234.27 KiB) Viewed 4944 times
Capture d’écran (28).png
Capture d’écran (28).png (351.55 KiB) Viewed 4944 times
Merry Christmas
KAEL_CyberCorp
Posts: 1
Joined: Wed Feb 03, 2021 5:39 pm

Re: Call for screenshots

Postby KAEL_CyberCorp » Wed Feb 03, 2021 6:05 pm

Following the guidelines by user OficineRobotica:
-LinkStage3 FreeCAD branch by RealThunder
-FreeCAD Customization tips by OficineRobotica https://www.youtube.com/watch?v=s7O0gIvXnLU
Using the "tire rim" tutorial by Mark Ganson for the example in the screenshot:
https://www.youtube.com/watch?v=3JCLuc36BGI
Hidden line view with Pie floating menu
FreeCAD-wheel-rimA.png
FreeCAD-wheel-rimA.png (563.88 KiB) Viewed 4494 times
Shadow view
FreeCAD-wheel-rimB.png
FreeCAD-wheel-rimB.png (487.41 KiB) Viewed 4494 times
Tessellation view
FreeCAD-wheel-rimC.png
FreeCAD-wheel-rimC.png (676 KiB) Viewed 4494 times
kosednar
Posts: 33
Joined: Tue May 10, 2016 2:04 am
Location: St. Louis, MO
Contact:

Re: Call for screenshots

Postby kosednar » Wed Feb 24, 2021 10:02 pm

Thanks to all my friends at the FreeCAD Forum.

Finished Flex Shaft Pedal.
Attachments
20210224_152347_resized.jpg
20210224_152347_resized.jpg (744.13 KiB) Viewed 4022 times
20210224_152345_resized.jpg
20210224_152345_resized.jpg (516.79 KiB) Viewed 4022 times
20210224_152340_resized.jpg
20210224_152340_resized.jpg (805.62 KiB) Viewed 4022 times
20210224_152324_resized.jpg
20210224_152324_resized.jpg (620.21 KiB) Viewed 4022 times
Closed Pedal.jpg
Closed Pedal.jpg (219.11 KiB) Viewed 4022 times
atererus
Posts: 29
Joined: Thu Mar 11, 2021 2:28 pm
Location: the Netherlands
Contact:

Re: Call for screenshots

Postby atererus » Thu Mar 11, 2021 10:32 pm

N-scale model of a Siemens S 700 point driver used by the German railways. Work is not ready yet. Can make better pictures, just ask. Design will be free and open source.

Image

Image
User avatar
jimmihenry
Posts: 25
Joined: Sat Jan 11, 2020 3:36 pm

Re: Call for screenshots

Postby jimmihenry » Sun May 09, 2021 12:01 am

Hi, here is a 4,8mm crimp connector. It has a interesting geometry. It is made as one body
with the Part Design workbench and FreeCAD Conda build 24825 on a Windows 7 confuser.
Image
Cheers.
suzanne.soy
Posts: 46
Joined: Sat Dec 19, 2020 11:55 pm

Re: Call for screenshots

Postby suzanne.soy » Thu Jun 17, 2021 1:19 am

Here's a sneak peak at my (pre-alpha) FreeCAD <-> Inkscape integration.

On the left, there is a sketch with a square and a circle, which has been piped into a parametric instance of the Inkscape plug-in "Fractalize", and the result was extruded. When editing the sketch, the plug-in is run again, and the extruded shape is automatically updates.

On the right, a completely different feature: an Inkscape window can be embedded into the FreeCAD MDI (Multiple Document Interface). In other words, Inkscape can appear within a FreeCAD tab. The goal is to allow editing 2D shapes by hand. It's not quite there yet, but from within FreeCAD it would be possible to "right-click -> edit in Inkscape", which would export the shape to SVG, open Inkscape in a tab, and sync the changes back. This integration mechanism is very generic, and pretty much no code is specific to Inkscape aside from a list of plug-ins and a couple of window management tweaks, so it should be possible to have integration of other applications (GIMP, Blender, …) with minimal effort per additional application.

These two features are completely unrelated (it is possible to use parametric Inkscape plug-ins from the XternalAppsInkscapeWorkbench without opening Inkscape in a tab, and it is possible to open Inkscape in a tab without using the parametric nodes in the document tree).

(yes, the text is tiny, I got hit by a bug :evil: which seems to affect all Qt apps on my machine, regardless of their AppImage/Nix/apt-get origin, and makes the text absolutely tiny on my low-dpi monitor, and normal on the hi-dpi one…)
Attachments
20210617_02h08m02s_grim.png
20210617_02h08m02s_grim.png (378.5 KiB) Viewed 343 times
:?: Please mark your posts as [solved] :!:
:idea: If the answer you got is a good fit for the wiki, you can edit it!
FreeCAD modelling & coding workbenches+macros: twitch GitHub