Call for screenshots
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
Re: Call for screenshots
Decauville Baladeuse d'inspection. This is a drawing of a small wagon at the Tramway de Pithiviers museum. The scale is 1:13.7 for use on garden railways, 45 mm gauge. It has been 3d printed.
Cheers,
Vailala
OS: Ubuntu 16.04.1 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.16.6703 (Git)
Build type: None
Branch: releases/FreeCAD-0-16
Hash: 2ce5c8d2e3020d05005ed71f710e09e9aa561f40
Python version: 2.7.11+
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
Cheers,
Vailala
OS: Ubuntu 16.04.1 LTS
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.16.6703 (Git)
Build type: None
Branch: releases/FreeCAD-0-16
Hash: 2ce5c8d2e3020d05005ed71f710e09e9aa561f40
Python version: 2.7.11+
Qt version: 4.8.7
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
- Attachments
-
- Balaview1.jpg (89.39 KiB) Viewed 14126 times
- openfablab
- Posts: 62
- Joined: Wed Nov 02, 2016 4:42 pm
- Contact:
Re: Call for screenshots
Some of my work
Fragment of automatic painting system:
Fragment of rotary powder storage with irregular inner surface
Device for belt cutting
The last device modelled in 0.16, prevous - in older version (may be 0.14)
They have not very high resolution due to my current screen. If needed, I can make larger ones.
Fragment of automatic painting system:
Fragment of rotary powder storage with irregular inner surface
Device for belt cutting
The last device modelled in 0.16, prevous - in older version (may be 0.14)
They have not very high resolution due to my current screen. If needed, I can make larger ones.
-
- Posts: 2
- Joined: Tue Jan 17, 2017 6:24 pm
Re: Call for screenshots
I'm going to extend our old furniture. There are my very first steps with Freecad.
- Attachments
-
- the 3d freecad model
- freecad-project.jpg (233.88 KiB) Viewed 13586 times
-
- the 2d freecad drawing
- freecad-project1.jpg (224.77 KiB) Viewed 13586 times
-
- the freecad project exported to blender
- result-with-blender.jpg (196.74 KiB) Viewed 13586 times
Re: Call for screenshots
wow it seams you did do drawings from every piece of the furniture, did you?holzwerken wrote:I'm going to extend our old furniture. There are my very first steps with Freecad.
-
- Posts: 2
- Joined: Tue Jan 17, 2017 6:24 pm
Re: Call for screenshots
In the past I used the blender to create the 3D model and libreCAD to become the 2D technical drawing. Unfortunately the job had to be done twice in this way. That's why I chose the freeCAD to perform this two tasks using only one tool. There are one drawing page for every piece of furniture in freeCAD document. For myself I found the View-Panel of Arch very useful to draw a pieces in one view. The single parts and connected dimension can be added separately to the drawing as well. In this way I hope to become for every Anbau part an useful 2D technical drawing.
Attached you can see the result for Anbau-1.
Attached you can see the result for Anbau-1.
- Attachments
-
- drawing-of-anbau-1.jpg (163.74 KiB) Viewed 13456 times
Re: Call for screenshots
Very cool model including the drawings. Just a question. I have never build my own Schrank. But if I would build one I would make the böden a bit smaler than the inner width is. But in the model it seams the böden exactly fits into the schrank !?
- OPEN CASCADE
- Posts: 3
- Joined: Tue Mar 14, 2017 2:27 pm
- Contact:
Re: Call for screenshots
Hi, Some images of the CNC
Re: Call for screenshots
Looking good.
Re: Call for screenshots
- Attachments
-
- Bildschirmfoto vom 2018-03-21 15-49-09.png (211.42 KiB) Viewed 11717 times