Hi again,
as a continuation of my last post, I think that there either must be a problem with inserting windows/door to an partition wall without the wall, or surface, behind being affected, or I have not done my homework correctly (if that is the case, please forgive me as I'm a newbie with FreeCAD).
So, my work around this is to create a rectangular main wall and then attach another open area, i.e. a toilet.
However, when I join the areas the points of wall intersection don't fuse as a continuous one like before, but rather show the intersection lines.
Is there a way to join/fuse these lines/walls so that it shows as a continuous surface?
Regards,
[SOLVED] Partition Walls
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
[SOLVED] Partition Walls
- Attachments
-
- garage.fcstd
- (16.6 KiB) Downloaded 59 times
Last edited by however on Tue Apr 15, 2014 10:53 am, edited 1 time in total.
Slackware 14.1 32b and FreeCAD 0.14
Re: Partition Walls
I am not sure what is your problem with the windows, in your file all looks ok...
To merge two wall objects, you have several choices:
- Select one wall, CTRL+select the other, and press the "Arch Add" button. In your file, that doesn't work well, not sure why...
- Select the two walls, then Arch->Utilities->Merge walls. This only works if the walls have the same width and height. It joins the underlying sketches into one, then rebuilds the wall. In your case this creates a kind of "loop" that doesn't work too well.
I would suggest you to model differently, and make one continuous sketch for the exterior wall, then separate segments for the interior walls, and add them to the main wall. I made an example on your file...
To merge two wall objects, you have several choices:
- Select one wall, CTRL+select the other, and press the "Arch Add" button. In your file, that doesn't work well, not sure why...
- Select the two walls, then Arch->Utilities->Merge walls. This only works if the walls have the same width and height. It joins the underlying sketches into one, then rebuilds the wall. In your case this creates a kind of "loop" that doesn't work too well.
I would suggest you to model differently, and make one continuous sketch for the exterior wall, then separate segments for the interior walls, and add them to the main wall. I made an example on your file...
- Attachments
-
- garage.fcstd
- (29.27 KiB) Downloaded 72 times
Re: Partition Walls
HI yorik,
I am starting to wonder whether I have got a defective package that maybe didn't even get installed properly.
The example you posted is exactly what I was trying to achieve. Would you be so kind to briefly list the steps you used? (rather than using your example, I believe it's a better idea if I learn it myself for future projects).
This is what I did:
1) create the floor sketch
2) Create structure object from the sketch
3) select the structure
4) create a new sketch on the selected structure
5) Lock it with the structure
6) Create a Wall object from the locked second sketch
7) repeat step 3, 4, 5 and 6
and the walls were joined nicely, but placing a door in that last added partition won't work
then instead of adding a partition (wall where the Toilet Door should be placed) I decided to create two separate walls, one for the main rectangular area and, 2 for the toilet area but they wont jon accordingly. I did this:
1) created a rectanguar sketch on the surface
2) created the Wall object
3) sketch on the Toilet Area
4) created the Toilet Wall object
5) set wall visibility to 'false' for both objects
6) edit the the tolet sketch and lock it to the main wall
7) set Wall visibility to 'true'
and the walls joined as in the example attached.
p.s.: I noticed in your adjusted example that you have a DWire object. What is it? what does it do?
Thanks.
Regards,
you only listed two choices neither of which work, as you noticed yourself.yorik wrote:To merge two wall objects, you have several choices:
I don;t see any Arch-> Add button (unless you meant "Add Components" buttonSelect one wall, CTRL+select the other, and press the "Arch Add" button. In your file, that doesn't work well, not sure why...
Thats what I did before in the example of the previous topic. but it would give me the issue with placing the 'ToiletDoor' which seemed to take part of the ToiletWall too.yorik wrote:I would suggest you to model differently, and make one continuous sketch for the exterior wall, then separate segments for the interior walls, and add them to the main wall. I made an example on your file...
I am starting to wonder whether I have got a defective package that maybe didn't even get installed properly.
The example you posted is exactly what I was trying to achieve. Would you be so kind to briefly list the steps you used? (rather than using your example, I believe it's a better idea if I learn it myself for future projects).
This is what I did:
1) create the floor sketch
2) Create structure object from the sketch
3) select the structure
4) create a new sketch on the selected structure
5) Lock it with the structure
6) Create a Wall object from the locked second sketch
7) repeat step 3, 4, 5 and 6
and the walls were joined nicely, but placing a door in that last added partition won't work
then instead of adding a partition (wall where the Toilet Door should be placed) I decided to create two separate walls, one for the main rectangular area and, 2 for the toilet area but they wont jon accordingly. I did this:
1) created a rectanguar sketch on the surface
2) created the Wall object
3) sketch on the Toilet Area
4) created the Toilet Wall object
5) set wall visibility to 'false' for both objects
6) edit the the tolet sketch and lock it to the main wall
7) set Wall visibility to 'true'
and the walls joined as in the example attached.
p.s.: I noticed in your adjusted example that you have a DWire object. What is it? what does it do?
Thanks.
Regards,
Slackware 14.1 32b and FreeCAD 0.14
Re: Partition Walls
You used Sketcher Workbench to create lines and used that to build Walls on it and that is just on of the options:p.s.: I noticed in your adjusted example that you have a DWire object. What is it? what does it do?
http://www.freecadweb.org/wiki/index.ph ... _the_walls
Yorik used tools available in Arch Workbench (and Draft Workbench too) to create lines used for creating Walls:
http://www.freecadweb.org/wiki/index.ph ... Draft_Line
http://www.freecadweb.org/wiki/index.ph ... Draft_Wire
DWire = Draft Wire
I do not know if this is mentioned or intended to be used like this but when creating lines for wall with mentioned tools i get best results if i set Top View before creating the lines:
I think not maybe there is a bug or something not done yet and mature but with practice you will learn what to use ATM to get expected results.I am starting to wonder whether I have got a defective package that maybe didn't even get installed properly.
Basically Yorik already did that here:The example you posted is exactly what I was trying to achieve. Would you be so kind to briefly list the steps you used? (rather than using your example, I believe it's a better idea if I learn it myself for future projects).
http://www.freecadweb.org/wiki/index.ph ... h_tutorial
Following that tutorial should get you started. Take time and work through it and test and try to understand everything it tries to teach you. It is possible something will not work as expected but there is usually enough information provided to do that in a different way to get results you are after!
Re: Partition Walls
Hi triplus,
Gosh! it was so easy! (when you have some references)
huge thank you for those tutorials! Now, I have something to read to better understand things in FreeCAD.
Regards,
Gosh! it was so easy! (when you have some references)
huge thank you for those tutorials! Now, I have something to read to better understand things in FreeCAD.
Regards,
Slackware 14.1 32b and FreeCAD 0.14