Thickness problem
Forum rules
Be nice to others! Read the FreeCAD code of conduct!
Be nice to others! Read the FreeCAD code of conduct!
Thickness problem
OS: Windows 10 Version 2009
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 2021.1015.24301 +4280 (Git)
Build type: Release
Branch: LinkDaily
Hash: 556c87868ea46796242156e9f73eae98259794b7
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/United States (en_US)
The freecad thickness command does not work properly.
Make thickness inwards side is not work properly. Works well on the outside but inner side is not work properly
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 2021.1015.24301 +4280 (Git)
Build type: Release
Branch: LinkDaily
Hash: 556c87868ea46796242156e9f73eae98259794b7
Python version: 3.8.6+
Qt version: 5.15.2
Coin version: 4.0.1
OCC version: 7.5.0
Locale: English/United States (en_US)
The freecad thickness command does not work properly.
Make thickness inwards side is not work properly. Works well on the outside but inner side is not work properly
- Attachments
-
- 123.zip
- (139 KiB) Downloaded 30 times
-
- 3.jpg (148.87 KiB) Viewed 2178 times
-
- 2.jpg (461.07 KiB) Viewed 2178 times
-
- 1.jpg (114.3 KiB) Viewed 2178 times
Last edited by hamza on Sat Nov 27, 2021 5:06 pm, edited 1 time in total.
Re: Thickness problem
Yes
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."
Re: Thickness problem
To explain this rather short answer: there were several thickness related posts today where such issues are explained. It boils down to: Yes, there are these issues. And more cannot be said.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Thickness problem
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Thickness problem
Couldn't resist . You have to model the material you want to take away using other subtractive features.
A Sketcher Lecture with in-depth information is available in English, auf Deutsch, en français, en español.
Re: Thickness problem
It is a well known issue. It is from the 3D engine that FreeCAD uses (OpenCascade OCCT).
FreeCAD has little or no influence on the development or improvement of OCCT.
In the mean time most of us have learned how to do such things without the Thickness tool. Like pocketing out the insides.
FreeCAD has little or no influence on the development or improvement of OCCT.
In the mean time most of us have learned how to do such things without the Thickness tool. Like pocketing out the insides.
Star Trek II: The Wrath of Khan: Spock: "...His pattern indicates two-dimensional thinking."