0.20: Cannot select restriction.

GAZ082 · Post by **GAZ082** » Wed May 18, 2022 7:29 pm

Check this file. Open the sketch, you will be able to select any restriction, select a dimensional one, delete it. Re create it and now try to select it or any other restriction. You wont be able to.

The only work around is to close the sketch and open it again.

Code: Select all

OS: Ubuntu Core 20 (GNOME/gnome)
Word size of FreeCAD: 64-bit
Version: 0.20.28870 (Git)
Build type: Release
Branch: master
Hash: 4ae98779c1c2524924316696dc3535c8cc5279e5
Python 3.8.10, Qt 5.15.3, Coin 4.0.0, OCC 7.6.2
Locale: English/United States (en_US)
Installed mods: 
  * Behave-Dark-Colors 0.0.1
  * BIM 2021.12.0

Shalmeneser · Post by **Shalmeneser** » Wed May 18, 2022 8:10 pm

No problem with :

Code: Select all

OS: Linux Mint 20.3 (MATE/mate)
Word size of FreeCAD: 64-bit
Version: 0.20.28611 (Git) AppImage
Build type: Release
Branch: (HEAD detached at a3b804e)
Hash: a3b804e7806c2b3b5e1228c41bca4569a743b400
Python 3.9.12, Qt 5.12.9, Coin 4.0.0, OCC 7.5.3
Locale: French/France (fr_FR)
Installed mods: 
  * Manipulator
  * fasteners
  * sheetmetal

Code: Select all

OS: Linux Mint 20.3 (MATE/mate)
Word size of FreeCAD: 64-bit
Version: 0.20.28872 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 9057658)
Hash: 9057658ae5d638f6903bc831b53ceb349c2870a2
Python 3.9.12, Qt 5.12.9, Coin 4.0.0, OCC 7.5.3
Locale: French/France (fr_FR)
Installed mods: 
  * Manipulator
  * fasteners
  * sheetmetal

GAZ082 · Post by **GAZ082** » Wed May 18, 2022 8:34 pm

I see you are using another distribution method rather than a Snap. Will try with the Appimage version.

GAZ082 · Post by **GAZ082** » Wed May 18, 2022 8:40 pm

Shalmeneser wrote: ↑Wed May 18, 2022 8:10 pm ..

Where did you get the Appimage? The wiki does not help.

Shalmeneser · Post by **Shalmeneser** » Wed May 18, 2022 8:43 pm

https://github.com/FreeCAD/FreeCAD-Bund ... kly-builds ?

GAZ082 · Post by **GAZ082** » Wed May 18, 2022 9:00 pm

Shalmeneser wrote: ↑Wed May 18, 2022 8:43 pm https://github.com/FreeCAD/FreeCAD-Bund ... kly-builds ?

Merci!

GAZ082 · Post by **GAZ082** » Wed May 18, 2022 9:15 pm

All good with the latest APPIMAGE:

Code: Select all

OS: Arch Linux (GNOME/gnome)
Word size of FreeCAD: 64-bit
Version: 0.20.28904 (Git) AppImage
Build type: Release
Branch: (HEAD detached at 8ad30d0)
Hash: 8ad30d03146fef0f39b90073fdf3e6072ed7f66d
Python 3.9.12, Qt 5.12.9, Coin 4.0.0, OCC 7.5.3
Locale: English/United States (en_US)
Installed mods: 
  * Behave-Dark-Colors 0.0.1

0.20: Cannot select restriction.

0.20: Cannot select restriction.

Re: 0.20: Cannot select restriction.

Re: 0.20: Cannot select restriction.

Re: 0.20: Cannot select restriction.

Re: 0.20: Cannot select restriction.

Re: 0.20: Cannot select restriction.

Re: 0.20: Cannot select restriction.